Welcome & Disclaimer

Hello & welcome to SuthrnPrincess Tuts. I am so excited that you stopped in to see what I have made with the gorgeous tubes and fabby kits that are out there. You will find FTU & PTU kits as well as FTU & PTU Tubes are used in my tutorials. If you run into a problem on a tut please feel free to email me and I will help if I can. My use of a FTU tube does not give you permission to use it. I have obtained permission either from the artist themselves or through a group to use their artwork. You need to personally contact them to obtain permission before using.

**Disclaimer**

The tuts contained within this blog are my own creation. They came from my brain and were created by my own hand. Any resemblance to the works of others is completely coincidental.



Powered by Blogger.
Thursday, August 11, 2011

postheadericon Rac Blue Angel Tut




This tutorial was created using PSPX2 and my own imagination. Any resemblance to the creations of someone else is completely coincidental.

Supplies:
Angeliki kit by Toxic Desirez found at her scrap store Skullified Scrapz
Tube by Ismael Rac found at his store here. Do not use without purchasing first and having a license.
Plug Ins Xero, EyeCandy 5
Font Wellsley

Let’s start:
Open a new image 700x700
Open Frame 1 and copy/paste to the canvas.  Resize the frame by 85%.
Effects> Plug Ins> EyeCandy Impact> Gradient Glow Select Outside Glow and Mask Selection> Settings Glow Radius 5, Soften Corners 8, Overall Opacity 100, Distortion Amount 0, Distortion Lump Size7, Gradient Smoothness 100 white and black.
Effect> Plug Ins> EyeCandy Impact> Glass Basic Bevel Width 952.75, Bevel Smoothness 50.53, Round Selection Corners 0, Inside selection selected, Glass color white, Opacity 69, Tinting 92, Refraction 0, Inner Shadow Opacity 30, Drop Shadow Opacity 80, Shadow Offset 26.84, Shadow Glow 8; Lighting tab Direction 156, Inclination 81, Highlight Brightness 1, Highlight Size 0, Highlight Color white, Refelection Map none; Bevel Profile Button
Effects> 3D Effects> Drop Shadow> Offset: vertical 3, horizontal 2, Attributes: Opacity 60, Blur 5, color Black
Open paper 18 and copy/paste to canvas. Using "magic" wand select frame layer and click inside of frame. Selections> Modify> Expand by 8 Selections> Invert. Select Paper layer and hit the delete key on your keyboard.
Drag paper layer under frame.
Open Cloud 1 and copy/paste to canvas. Image> Resize 65%.  Place to the right. Right click on layer and duplicate. Image> Mirror. Add drop shadow changing Opacity to 27.
Open Feather Fan and copy/paste to canvas. Resize to 105% drag to bottom layer.
Open Flame and copy/paste to canvas. Resize to 90% drag to bottom layer.
Open Flower1 and copy/paste to canvas. Resize to 45% then drag to bottom right corner over the cloud using your Pick tool. Right click on it and duplicate. Image> Mirror.
Open Flower 2 and copy/paste to canvas. Resize to 30% Drag under flower 1 to the right bottom and then right click and duplicate. Move the duplicate up and to the left a little. When it is positioned like desired duplicate it and the original and mirror the duplicates.
Add Drop Shadow to all the flowers.
Open Glitter and copy/paste it to the canvas.  Resize to 85% Image> Free Rotate Right 90 degrees then place to bottom right. Adjust> Color> Channel Mixer> Output Channel: Grey, Source Channels: Red 200, Green 0, Blue 0, Constant 0 Monochrome checked. Right click and duplicate Image> Mirror.
Open Light Rays copy/paste to canvas.  Resize to 75% then duplicate and mirror. Now in the layer list on the right hide the two light rays layers. We will come back to them in a bit.
Open Moon and copy/paste to canvas. Resize to 65% Drag above fan and to the right. Drag layer under paper layer.
Open Ribbon 2 and copy/paste it to canvas. Rotate right 35 degrees. Resize 90% and drag the layer to under the flame layer.
Open Sparkle and copy/paste it. Image> Flip and then Image> Mirror.
At this point take the time to drop shadow anything that you have not yet. except for the glitter trail and the light rays.
Copy/paste the close-up of your tube and place as you like in the right side frame.
Effects> Plug Ins> Xero> Porcelain> Softness 50, Strength 128, Brightness 128, Red channel 0, Green Channel 0, Blue channel 173.  Duplicate the tube and in the blend mode drop down change it to soft light. Merge the 2 tube layers Duplicate the Tube again and Mirror.
Using the Freehand Tool outline the right frame then select the right tube layer and then Selections Invert and hit delete and then Selections none. Do the same for the left side.
Copy/paste full body tube to canvas.  Add porcelain as before and then duplicate and change blend mode to Luminance. Merge the two then duplicate again and drag one to under the paper layer. You should have 1 above the frame layer and 1 under the paper layer. Using the eraser tool remove what you want that is covering the frame layer. I removed her right leg and arm so that it looked like she was stepping out from behind the frame.
Drop shadow the tube layers.  I used 27 opacity on the top layer and 27 on the bottom so that it was not too dark. and then 54 on the close up layers.
Go to the Light Rays layers and make them visible again. Select each layer separately and change blend to soft light. Drag both under frame layer.  Select the paper layer in your layer list on the right and then Selections> Select All, Selections> Float, Selections> Defloat, Selections> Invert and then select each light rays layer separately and hit the delete key on your keyboard.
Resize the entire image to 600x600.
Add your copyright.
Merge Visible.
Add name that you would like on it. I used Wellsley size 85 color #a5eefl
Then Adjust> Add/Remove Noise> Noise 10, Drop shadow with 20 Opacity.
Merge Visible again.
Save as PNG.

0 comments:

TWI

Photobucket

Sunshine Daze Topsite

Sunshine Daze Topsites List

Vote Please

Photobucket

Fan Of

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Chat box

About Me

My Photo
SuthrnPrincess
I am a mom of 5 rambunctious and audacious kids. 1 girl and 4 boys. I started out tagging and fell in love with my PSP. I am with the most wonderful man in my world, George. If you make something with a mask or template I would love to see it. Please feel free to email me at georges_princess@yahoo.com. If you make a tutorial please link back to my blog for supplies do not include my materials nor link to my file share site. I would love to put your tutorial link on my blog so please feel free to email me :).
View my complete profile

My Blinkies

Photobucket Photobucket Photobucket

CT For

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Followers

Labels