Welcome & Disclaimer

Hello & welcome to SuthrnPrincess Tuts. I am so excited that you stopped in to see what I have made with the gorgeous tubes and fabby kits that are out there. You will find FTU & PTU kits as well as FTU & PTU Tubes are used in my tutorials. If you run into a problem on a tut please feel free to email me and I will help if I can. My use of a FTU tube does not give you permission to use it. I have obtained permission either from the artist themselves or through a group to use their artwork. You need to personally contact them to obtain permission before using.

**Disclaimer**

The tuts contained within this blog are my own creation. They came from my brain and were created by my own hand. Any resemblance to the works of others is completely coincidental.



Powered by Blogger.
Wednesday, October 26, 2011

postheadericon Boo



Supplies Needed:
Three tubes of choice. Please follow artist TOU. I used the amazing work of Elias Chatzoudis available at his store.
PTU Kit Whos At The Door by SleekNSassy.
PlugIns: Xero-Porcelain, EyeCandy5-Gradient Glow.
Font of choice. I used Amazone BT


Let's Get Started:
Open a new 700 x 700 image.
Paste Frame. Duplicate the frame. Image> Resize to 45% and position at the bottom right of the frame. Duplicate again and position a little higher on the right side of the frame. Drag the higher small frame under the other small frame. (If this is confusing just look at my example :) ).
Adjust> Hue & Saturation> Colorize> hue 101, Saturation 204.
Select the other small frame. Colorize with Hue 187, Saturation 255.
Paste Paper 6. Image> Resize to 75%. Position behind the 2 small frames. Duplicate and drag behind each small frame.
Select the top small frame. Use your wand tool to select inside of the frame. Selections> Modify> Expand by 3. Selections> Invert. Select the paper layer for the top frame. Hit the delete key on your keyboard.
Select> None.
Repeat the same steps with the bottom small frame.
Paste Paper 8. Image> Resize to 75%. Drag under the large frame. Select the large frame. Use the wand and select inside of the frame. Selections> Modify> Expand by 4. Selections> Invert. Select the paper layer for the large frame. Hit the delete key on your keyboard.
Selections> Select None.
Paste Bag4. Image> Resize to 50%. Drag under the bottom paper layer and position off to the left of the large frame.
Paste Bat. Image> Resize to 35%. Use the Pick tool to rotate the bat slightly. Position at the top left of the frame. Duplicate. Use pick tool to rotate again and position to the left of the frame. Repeat twice placing on the right side this time.
Paste Boo1. Image> Resize to 65%. Position at the top of the frame slightly off center and drag to top layer.
Effects> 3D Effects> Drop Shadow: Vertical 2, Horizontal 1, Opacity 50, Blur 5, Color Black.
Paste Candy Corn. Image> Resize to 15%. Position at the bottom corner of the bag and duplicate. Image> Resize to 75%. Drag layer under first candy corn. Rotate a little with the pick tool and position off to the left side slightly. Duplicate the small candy corn. Image> Mirror. Position to the right of the large candy corn.
Paste Cat 2. Image> Resize to 50%. Position to the bottom right of the frames.
Paste Doodle. Image> Resize to 75%. Drag under bag layer and position to the left. Duplicate. Image> Mirror.
Drag the Bat layer under the Doodle layer.
Paste Ghost Lamp. Image> Resize to 85%. Position to the left of the frame where it looks like the ghost is peaking out.
Paste Jackolantern2. Image> Resize to 25%. Then 75%. Drag to top layer and position to the left of the bag.
Paste Pumpkin. Image> Resize to 15%. Drag behind Jackolantern layer and position down slightly. Duplicate and position slightly to the left.
Paste Spider. Image> Resize to 25. Drag under cat layer and position to the left of the cat.
Paste Spider2. Image> Resize to 25%.  Drag layer under bottom small paper layer and position to the left of the lower frame.
Paste Cauldron. Image> Resize to 25%. Position to the left of bottom small frame.
Paste first tube of choice. Image> Resize to 75% and position in the back small frame.
Effects> PlugIns> Xero-Porcelain: 50, 128, 128, 0, 0, 255. Duplicate the tube.
Adjust> Hue & Saturation> Colorize: Hue 101, Saturation 204.
Change Blend Mode to Overlay. Change Opacity to 50%. Merge together.
Select the paper layer behind the frame. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer again and hit the delete button on your keyboard. Selections> None. Merge together.
Paste second tube of choice. Position and repeat the steps used on the first tube. Change the Hue and Saturation to 187 and 255. Change Blend mode to Overlay and leave opacity at 100.
Paste your third tube of choice. Drag above large paper layer.
Select the paper layer. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer again and hit the delete key on your keyboard. Selections> Select None.
Porcelain same as before. Duplicate. Change blend mode to soft light. Merge together.
Shadow the 3 tubes with the following settings. Effects> 3D Effects> Drop Shadow: Vertical 2, Horizontal 1, Opacity 50, Blur 5, Color Black.
Shadow all elements except the bats with the settings vertical 2, horizontal 2, opacity 35, blur 5 color black.
Merge Visible.
Image> Resize to 600 x 600.
Add Copyright.
Add name with font of choice. I used Amazone BT size 90, Bold, Color #00c000.
Adjust> Add/Remove Noise> Add Noise: Gaussian 25 Monochrome checked.
Effects> PlugIns> EyeCandy5> Gradient Glow: Glow Type Outside, Glow Radius 5, Soften Corners 0, Overall Opacity 100, Distortion Amount 0, Distortion Lump Size 7, Gradient Smoothness 100, color #85057f.
Drop Shadow Vertical 2, Horizontal 2, Opacity 40, Blur 3, Color black.
Merge Visible.
Save as PNG.


Thanks Jen for allowing me to use his wonderful kit!

0 comments:

TWI

Photobucket

Sunshine Daze Topsite

Sunshine Daze Topsites List

Vote Please

Photobucket

Fan Of

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Chat box

About Me

My Photo
SuthrnPrincess
I am a mom of 5 rambunctious and audacious kids. 1 girl and 4 boys. I started out tagging and fell in love with my PSP. I am with the most wonderful man in my world, George. If you make something with a mask or template I would love to see it. Please feel free to email me at georges_princess@yahoo.com. If you make a tutorial please link back to my blog for supplies do not include my materials nor link to my file share site. I would love to put your tutorial link on my blog so please feel free to email me :).
View my complete profile

My Blinkies

Photobucket Photobucket Photobucket

CT For

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Followers

Labels