Welcome & Disclaimer

Hello & welcome to SuthrnPrincess Tuts. I am so excited that you stopped in to see what I have made with the gorgeous tubes and fabby kits that are out there. You will find FTU & PTU kits as well as FTU & PTU Tubes are used in my tutorials. If you run into a problem on a tut please feel free to email me and I will help if I can. My use of a FTU tube does not give you permission to use it. I have obtained permission either from the artist themselves or through a group to use their artwork. You need to personally contact them to obtain permission before using.

**Disclaimer**

The tuts contained within this blog are my own creation. They came from my brain and were created by my own hand. Any resemblance to the works of others is completely coincidental.



Powered by Blogger.
Thursday, May 31, 2012

postheadericon Finding Neverland FTU




Supplies:

FTU Kit Finding Neverland Sampler by Created by Jill

Template 12 by Vix

Tube of choice. I used a tube by LegioStudio. Please do not use unless you have permission and follow TOU.

Font of choice. I used Aspire.

PlugIns: Xero-Porcelain




Let's Get Started:

Open Vix's template 12 in PSP.

Hold the shift key and pless the letter D

Close out the original template.

Delete the TOU, Background and rectangle layer.

Image> Resize Image to 700 x 700

Paste the closeup of the tube that you chose. Drag the tube behind the Inner Circle Frame layer. Select the inner circle fill layer. Selections> Select All. Selections> Float. Selections> DeFloat. Selections> Invert. Select the tube layer and hit the delete key on your keyboard. Selections> Select None.

Paste Paper02. Image> Resize to 65%. Drag the paper layer above the Inner Circle Fill layer. Position as desired. Select the Inner Circle Fill layer and repeat the Float steps from above. Delete the Inner Circle Fill layer.

Paste Paper03. Image> Resize to 75%. Drag above the Large Circle Fill layer. Repeat steps above. Delete Large Circle Fill Layer.

Paste Paper04. Image> Resize to 75%. Drag above Inner Frame Layer. Duplicate. Drag above the Outter Circle Frame Layer. Repeat steps from above (float and such). Delete both original frame layers.

Select the top frame layer (inner circle). Adjust> Softness> Soften. Repeat with Outter Frame Layer.

Select the tube layer again. Effects> PlugIns> Xero: Porcelain- Softness- 50, Strength 128, Brightness 128, Red Channel 0, Green Channel 0, Blue Channel 255.

Duplicate. Change Blend Mode (just above the layer list) to Soft Light. Merge Down.

Effects> 3D Effects> Drop Shadow: Vertical 2, Horizontal 2, Opacity 50, Blur 5, Color Black.

Repeat with both frame layers.

Paste Frame 1 Image> Resize to 85%. Drag to bottom layer.

Paste Flower Scatter. Drag to top layer and delete the last 3 flowers. Position at the bottom right of the frame. Drop Shadow.

Paste Beads 2. Image> Resize to 85%. Drag under Inner Circle Frame layer and position as desired towards the bottom. Select the paper layer and repeat the above select all, select float steps.

Paste Full body tube. Image> Resize to 45% (mine was rather large yours may not need such a drastic resize). Drag to the top layer and position off to the bottom left. Drop Shadow.

Paste Ribbon2. Image> Resize to 50%. Drag above the outter circle frame layer and position to the top left. Drop Shadow.

Paste Mushrooms. Image> Resize to 50%. Drag behind the full body tube layer and position at the bottom off to the right a little. Drop Shadow.

Paste Greenery1. Image> Resize to 95%. Drag behind the Ribbon layer and position to the left. Drop Shadow.

Merge Visible.

Image> Canvas Size: width 640 height 700.

Use pick tool to recenter.

Image> Resize to width 594 height 650.

Add copyright.

Merge Down.

Add Name with font of choice. I used Aspire size 125, Bold, Color #d2dd99. I used my Pick Tool to rotate the text to look as I liked.

Adjust> Add/Remove Noise> Add Noise: Gaussian 15 monochrome checked.

Drop Shadow 2, -2, 75, 5, Black.

Merge Visible.

Save as PNG.




Thank you so much Jill and Vix for sharing your awesome goodies. A special thank you to LegioStudio for allowing the use of his gorgeous work!!















postheadericon Edgy Rocker FTU




Supplies:

FTU Kit Edgy Rocker by Pink Candy Designs

Matching Template (172) by Kristin at Toxic Desirez

Tube of choice. I used the gorgeous work of Masuimi Max. This artist is FTU HOWEVER you must have permission. Please do not use Masuimi's work without it!.

Font of choice. I used Before the Rain.

PlugIn: Xero (Optional as you can skip this step)



Let's Get Started:


Open Kristin's Template.

Delete Creator layer.

Paste Paper 10. Drag above the Rectangle Bottom Layer. Duplicate and drag above the Rectangle Top Layer.  Select the Rectangle Bottom Layer. Selections> Select All. Selections> Float. Selections> DeFloat. Selections> Invert. Select the paper layer above the Rectangle Bottom layer and then hit the delete key on your keyboard. Selections> Select None. Repeat these steps with the Rectangle Top layer and the duplicate paper.

Delete the Rectangle Top and Bottom Layer once finished.

Paste Paper 3. Drag above the Square Bottom layer and then duplicate and drag above the Square Top Layer. Repeat the steps you did with the Rectangle Top and Bottom.

Delete the Square Top and Bottom layer.

Select the paper 3 layer associated with the Square Bottom Layer and duplicate. Change the Blend Mode (located above the layer list) to Multiply. Merge with the original. Do the same for the Square Top Layer.

Paste Paper 14. Drag above the Rounded Rectangle Bottom. Duplicate and Drag above the Rounded Rectangle Top. Repeat the same steps as you did with Paper 10 and theRectangle Bottom Layer.

Delete Rounded Rectangle Top and Bottom layer.

Paste Paper 2. Drag above the Rounded Rectangle layer and repeat steps from before.

Paste Paper 5. Drag above the Circle layer and Repeat.

Delete Rounded Rectangle layer and Circle layer.

Paste the Close-Up of the tube taht you chose.

Effects> PlugIns> Xero> Porcelain: Softness 50, Strength 128, Brightness 128, Red Channel 0, Green Channel 0, Blue Channel 255.

Duplicate the tube. Change Blend Mode to Multiply and then merge together.


Drag Tube layer above the Circle paper layer. Select the Circle Paper layer. Selections> Select All. Selections> Float. Selections> DeFloat. Selections> Invert. Select the tube layer and then hit the delete key on your keyboard. Selections> Select None.

Paste Text. Image> Resize to 85%. Position towards the bottom of the circle.
Paste Studs. Drag under the circle paper layer and position at the top of the rounded rectangle paper.

Paste Wire. Drag to the bottom layer and position to the top right.

Paste Glitter. Positon to the left bottom.

Paste Lights. Image> Resize to 90%. Drag above Rounded Rectangle Layer and position at the bottom of the Rounded Rectangle paper.

Paste Button. Image> Resize to 25%. Drag below text layer and position to the right of the circle. Duplicate. Image> Mirror.

Paste Decor. Drag behind Rounded Rectangle Layer. Position to the top right. Duplicate. Image> Mirror. Image> Flip. Using your Erase tool remove the bottom of the stick on both sides.

Paste Microphone. Image> Resize to 75%.  Drag to above the glitter layer. Position to the bottom right of the template.

Paste Pin. Resize to 45%. Drag to top layer. Position over the top of the left corner rectangle.

Paste Ribbon2.  Drag above the glitter layer and position to the top where it is visible above the template. Duplicate. Image> Mirror. Image> Flip.

Paste the full body tube that you chose. Drag to top layer. Image> Resize to 65%. Create a New Raster Layer. Drag the new layer behind your tube layer.

Select the tube layer. Selections> Select All. Selections> Float. Selections> DeFloat. Selections> Modify> Expand by 4. Select the New layer that you created a few minutes ago and flood fill the selected area with color #a21209. Select None.

Image> Add/Remove Noise> Add Noise: Uniform, 100, Monochrome checked.

Merge the tube and the Glitter area you just made together.

Effects> 3D Effects> Drop Shadow: Vertical -2, Horizontal -2, Opacity 50, Blur 5, Color Black.

Drop shadow all layers changing the vertical and horizontal to 2 except the close up, wire and glitter.

Merge Visible.

Image> Resize 635 width by 550 height.

Add Copyright.

Add name with font of choice. I used Before The Rain size 48, Bold, Color the same as the flood fill for the glitter around the full body tube.

Image> Add/Remove Noise> Add Noise: Uniform 50, Monochrome checked.

Effects> 3D Effects> Drop Shadow: Vertical 3, Horizontal 4, Opacity 100, Blur 5, Color Black.

Merge Visible.

Save as PNG.


Thank you Aurelie and Kristin for sharing your wonderful creations. And a huge thank you to Masuimi Max for sharing his gorgeous work with the psp community!!














Friday, May 25, 2012

postheadericon Proud To Be An American FTU





Supplies:

Template 73 by Rosey

Tube of choice. I used the amazing work of FTU artist Popeye Wong. Please read his TOU and follow them appropriately before using!

FTU Kit 4th of July by Nichole at Envied & Admired Scraps

Font Quilline Script Thin

PlugIns:  Alien Skin Eye Candy 5: Glass (optional as you can skip those steps and still have an awesome tag!)




Let's Get Started:

Open template 73 in PSP.

Delete the creator layer and the white background layer.

Select the White Star Circle Layer.

Effects> PlugIns> AlienSkin: EyeCandy 5: Impact> Glass: Basic- Bevel Width 3, Bevel Smoothness 4.74, Round Selection Corners 0, Inside Selection selected, Glass Color #f2f2f2, Opacity 100, TInting 100, Refraction 100, Inner Shadow Opacity 75, Drop Shadow Opacity 7, Shadow Offset 10.80, Shadow Glow 0; Lighting- Direction 74, Inclination 57, Highlight Brightness 100, Highlight Size 65, Highlight Color white, Reflection Map 0; Bevel Profile- Factory Profile Button.

Repeat with USA Wordart layer, and white line layer.

Select Bottom left Red star layer and repeat glass changing the round selection corners to 19, the glass color to #d31414, and highlight color to #f21217.

Effects> 3D Effects> Drop Shadow circle word art Vertical 2, Horizontal 2, Opacity 50, Blur 5, Color Black.

Repeat Drop Shadow with the white star circle layer and both of the red star layers.

Paste tube of choice. Drag above the blue circle layer. If you need to resize the tube to fit do so now. I did not need to.

Duplicate the tube and drag the layer above the white star circle layer. Using your erase tool remove the part of her hand and shoe that is over the stars (what needs to be erased on yours may be different depending on the tube that you use.

Paste Fireworks 1. Image> Resize to 50%. Position to the top left corner.  Drag layer to the bottom. Duplicate. Image> Mirror. Duplicate. Image> Flip. Duplicate. Image> Mirror.

Paste Flower 2. Image> Resize to 15%. Drag below the blue rectangle layer. Position to the bottom left on the end of the white line layer. Duplicate. Image> Mirror. Duplicate. Image> Flip. Duplicate. Image> Mirror.

Drop shadow all of the layer that you have not so far except for the top tube layer and the fireworks layers.

Merge Visible.

Image> Resize to 650 width by 598 height.

Add copyright.

Add Name with font of choice. I used Quilline Script Thin size 100 Bold color #00213d.

Drop Shadow same as other layers.

Merge Visible.

Save as PNG.




This was so much fun to make! Thank you Rosey, Nichole and Popeye Wong for the use of the supplies!!














Thursday, May 24, 2012

postheadericon Patriotic PTU





Supplies:

Tube of choice. I used the awesome work of FTU artist David Collins. Please check his TOU and make sure to have permission before using.

PTU kit Patriotude by Kaci of Scrappin Krazy Designs.

Template 410 by Missy of Devine Intentionz

Font of choice. I used VanRose.



Let's Get Started:

Open template 410 and delete the layer with the "by missy" information on it.

Paste Paper 12. Drag layer over the frame back layer. Select the frame back layer. Selections> Select All.  Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and then hit the delete key on your keyboard. Selections> Select None. Delete the frame back layer.

Paste Paper 13. Drag above rounded edge rec 2 layer. Duplicate the paper. Select the rounded edge rec 2 layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and then hit the delete key on your keyboard. Selections> Select None.

Use the duplicated paper to repeat the steps for rounded edge 2 layer with the rounded edge rec layer. Delete both of the original rounded edge rec layers.

Paste Paper 12 again. Drag above thin rectangle layer. Select the thin rectangle layer. Selections> Select All.  Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and then hit the delete key on your keyboard. Selections> Select None. Delete the thin rectangle layer.

Paste Paper 12 and repeat the above steps with the stars layer. Delete the stars layer.

Paste Paper 3. Duplicate. Drag one of the paper layers above the rectangle 1 layer and the other above the rectangle 2 layer. Select the rectangle 1 layer and repeat the Select all, float, defloat, invert, delete steps with both of the rectangle layers and then delete the original layers.

Select the top paper layer for rectangle 1.

Adjust> Softness> Soften More.

Repeat with the rectangle 2 layer.

Paste Element 70. Image> Resize to 25%. Drag to top layer. Position on the far left top corner of the frame. Duplicate. Position over the far right top corner of the frame.

Paste Element 72. Image> Resize to 35%. Position at the botoom left corner of the frame. Duplicate. Image> Mirror. Use Pick tool to position at the far right corner of the frame.

Paste Element 27. Drag above raster 4 layer. Position over the thin rectangle.

Paste Element 34. Drag above the Raster 5 layer. Position to the left. Duplicate. Image> Mirror. Image> Flip.

Paste Element 18. Drag to bottom layer. Position at bottom right. Duplicate. Image> Mirror. Image> Flip.

Paste first tube of choice and position in the middle frame. Click inside of the frame using your wand tool. Selections> Modify> Expand: by 7. Selections> Invert. Hit your delete key. Selections> Select None.

Repeat with the 2nd and 3rd tube that you chose in the 1st and 3rd frame.

Paste Element 22. Image> Resize to 75%. Position to the left. Drag layer to bottom layer. Duplicate. Image> Mirror. Image> Flip.

Paste Element 16. Image> Resize to 75%. Position to the left. Duplicate. Image> Mirror. Drag behind the frames layer. Select the paper layer behind the tubes.  Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the sparkles layer and then hit the delete key on your keyboard. Selections> Select None.

Select the Sparkle layer and change the opacity to 75%.

Paste Element 13. Image> Resize to 75%. Drag below the striped paper layer and position at the top right. Duplicate. Image> Mirror. Image> Flip. Reposition to the left of the bottom frame corner.

Select the top layer (right dragonfly).

Effects> 3D Effects> Vertical: 2, Horizontal 2, Opacity 50, Blur 5, Color black.

Repeat for all layers except the sparkles and the paper behind the tubes.

Merge Visible.

Image> Resize: 650 width by 419 height.

Add copyright.

Merge Down.

Add name with font of choice. I used VanRose size 72 Bold color #3d5864.

Adjust> Add/Remove Noise> Add Noise: Uniform 40 Monochrome checked.

Drop Shadow changing opacity to 75.

Merge Visible.

Save as PNG.



Thank you Kaci for allowing me use of your awesome kit! And a huge thank you to David Collins for allowing use of his gorgeous works!!












Tuesday, May 22, 2012

postheadericon Stars & Stripes PTU






Supplies:

Tube of choice. I used the gorgeous work of FTU artist David Collins. Make sure that you have permission before using and that you follow his TOU.
Template by Holly available on the Creative Misfits Blog
PTU kit by Scrappin' Krazy Design Stars and Stripes
Font of choice. I used Verdana



Let's Get Started:

Banner:
Open Holly's Star Template.
Paste Paper 08. Select Raster 3 (center star). Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit delete. Selections> Select None. Drag above the Raster 3 layer. Delete Raster 3.

Paste Paper 07. Merge the two side star layers together. Drag the paper above the two star layers.  Select the two star layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit delete. Selections> Select None. Drag above the two star layer. Delete the original two star layer.

Paste Paper 03. Image> Resize to 85%. Drag above Copy of Raster 4 layer (top bar). Select the top bar layer.  Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit delete. Selections> Select None. Delete the original top bar layer (Copy of Raster 4).

Paste Paper 02. Drag above Raster 4 (bottom bar). Select bottom bar layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit delete. Selections> Select None. Delete original bottom bar layer.

Flood Fill Border white. Adjust> Add/Remove Noise> Add Noise: Uniform, 100, Monochrome checked. Repeat Noise.

Effects> 3D Effects> Drop Shadow: Vertical 2, Horizontal 2, Opacity 50, Blur 5, Color Black. Repeat changing vertical and horizontal to -2.

Drop Shadow starts with the -2 vertical and horizontal settings.

Paste Glitter 1. Drag above background layer and position the left behind the star. Duplicate. Image> Mirror.

Paste Glitter 4. Position at the top of the blue star. Duplicate. Image> Flip. Position under the right point of the blue star. Duplicate. Image> Mirror. Position behind the left point of the blue star.

Paste Butterfly 4. Image> Resize to 35%. Position to the left and drag to top layer. Duplicate. Image> Mirror.

Paste Ribbon 1. Image> Resize to 50%. Drag behind left red star layer and position. Duplicate. Image> Mirror.

Paste Ribbon 2. Drag behind blue star and position as desired.

Drop Shadow the butterflies and the ribbons.

Paste Tube of choice. Drag layer above the blue star layer. Position as desired over the blue star. Duplicate. Select the blue star layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the bottom tube layer and hit delete. Selections> Select None.


Select the top tube layer and use your erase tool to remove the bottom portion hanging off the star.

Paste tube again. Drag above the background layer and position between the blue star and the red star to the right. Change Blend Mode to Luminance (L). Duplicate. Image Mirror.

Merge Visible.

Add Copyright.

Add Name with font of choice. I used Verdana size 14 Bold color white. I repeat typed it until it fit the space of the bottom bar to my liking. Then I converted to raster and duplicated. With my Pick tool I positioned it to the other side of the bar.

Merge Visible.

Save as PNG.



Avatar:

Open the template again.

Using your selection tool start from the top left and select a 200 x 200 area. Selections> Invert. Select each layer individually and hit delete.

There will be a lot of blank space just wait and we will get rid of it.

Select the border (top layer). Duplicate. Image> Mirror. Use Pick tool to reposition to where it sits at the 200 mark on the pixel ruler. It will form a complete border. Merge with original layer.

Flood Fill white.

Adjust> Add/Remove Noise> Add Noise: Uniform, 100, monochromed.

Paste Paper 07. Drag above star layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit delete. Selections> Select None.

Delete original star layer, point of the center star layer, and copy or Raster 3 layer.

Paste Paper 03. Image> Resize to 85%. Drag above Copy of Raster 4 layer (top bar). Select the top bar layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit delete. Selections> Select None. Delete the original top bar layer (Copy of Raster 4).
Paste Paper 02. Drag above Raster 4 (bottom bar). Select bottom bar layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit delete. Selections> Select None. Delete original bottom bar layer.

Paste glitter 1 and position behind the star.

Paste Ribbon 1. Image> Resize to 50%. Drag behind star. Drop Shadow.

Paste Tube and position over the star as desired. Drop Shadow.

Delete Raster 2.

Hide Border layer.

Merge Visible.

Image> Canvas Size: 205 width by 200 hieght. Reposition the avatar to the center. Unhide the border and reposition as well with the Pick Tool.

Creat New Raster Layer and flood fill white.

Paste Tube. Change blend mode to Luminance (L). Position to the right of the star.

Select Border. Drop Shadow: vertical 2, horizontal 2, Opacity 50, blur 5 color black. Repeat changing horizontal and vertical to -2.

Merge Visible.

Image> Resize to 150 width by 146 height.

Add Copyright.

Add name same as on banner.

Merge Visible.

Save as PNG.


Thanks Kaci for allowing me to use this awesome kit! And thank you to David Collins for allowing use of his gorgeous art!!










Monday, May 21, 2012

postheadericon Soft Dreams PTU






Supplies:
PTU Kit Soft Dreams by Cindy (ChiChi Designz)
Tube of choice. I used a wonderful FTU artist named Titusboy25. Do not use his work without asking permission prior.
Template by Sue available on the Creative Misfit Blog
Font of choice. I used Vladimir Script


Lets Get Started:
Open Template 1 by Sue.
Shift+D to make a copy and close the original.
Delete the creator layer.
Drag the large rectangle layer along with the dots and frame for it under the bottom long rectangle layer.
Paste Rose Frame. Drag the layer above the circle dots layer. Image> Resize by 90%.
Paste Paper 21. Image> Resize to 80%. Drag above circle layer.
Select the circle layer. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None.
Paste Paper 18. Image> Resize to 68%. Drag above large rectangle layer.
Select the large rectangle layer. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None.
Duplicate the paper layer and change the blend mode to Multiply. Duplicate the paper twice more so that you have 3 layers and then merge them back into the original one layer at a time.
Paste paper 14. Image Resize to 80%. Drag behind horizontal rectangle frame layer. Position the paper as desired behind the frame.
Select the horizontal rectangle layer. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None.
Paste Paper 13. Image> Resize to 85%. Drag behind vertical rectangle frame layer.
Select the vertical rectangle layer. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None.
Select the Circle Frame layer. Adjust> Color> Red/Green/Blue> Red 100, Green 100, Blue 100. Repeat R/G/B changing Green to 16 and Blue to 77.
Select the Dot Circle Layer.  Adjust> Color> Red/Green/Blue> Red 100, Green 100, Blue 100. Repeat not changing the numbers on any of the three. And then repeat R/G/B changing Green to 16 and Blue to 77.
Repeat what you did with the Dot Circle with both the horizontal and vertical rectangle frames.
Select the Large Rectangle Frame and Adjust the color once with all three (red/green/blue) set to 100.
Select Circle 1 layer and Adjust> Color> Red/Green/Blue> Red 100, Green 100, Blue 100. Repeat R/G/B changing Green to 16 and Blue to 77.
Do the same with Circle 2.
Paste Beads. Image> Resize to 95%.Drag above the large rectangle frame layer and position at the bottom of the rectangle.
Paste Clouds. Image> Resize to 85%. Drag above the Mask layer and position off to the left. Duplicate and mirror.
Paste Bow. Image> Resize to 45%. Drag above horizontal frame and position to the right corner. Duplicate and mirror.
Paste Ribbon. Drag behind clouds. Change Opacity of the Ribbon layer to 57%. Erase the bottom end of the ribbon.
Paste Tree. Drag layer to the bottom and position at the top. Duplicate. Image> Flip. Duplicate. Image> Free Rotate> 90 degrees left. Duplicate. Image> mirror.
Delete the Mask Layer.
Paste Pearl Ribbon. Image> Resize to 90%. Drag behind beads layer. Position behind the beads.
Paste Lantern. Image> Resize to 65%. Drag behind the large rectangle layer and position. Duplicate and Mirror.
Drag the 2 circle glitter layers behind the lantern layers.
Paste Pillows. Image> Resize to 55%. Position over the bottom of the vertical rectangle and drag above frame for the rectangle.
Paste Lamb. Image> Resize to 45%. Position next to the pillow to the left.
Paste Jar. Image> Resize to 35%. Drag behind pillow layer and position to the right.
Paste Butterfly. Image> Resize to 25%. Drag to top layer. Position to the left of the circle Frame. Duplicate. Image> Mirror.
Paste tube of choice. Drag layer above circle layer.
Effects> 3D Effects> Drop Shadow: Horizontal 2, Vertical 2, Opacity 25, Blur 5, Color Black.
Duplicate. Drag above Rose frame layer.
Select the circle layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the bottom tube layer and hit the enter key on your keyboard. Selections> Select None.
Select the top tube layer and remove with your erase tool the bottom part that is over the frames bottom portion.
Shadow the layers you would like with the same setting as the tube layer.
Merge Visible.
Image> Resize to 635x635.
Add Copyright.
Add name using font of choice. I used Vladimir Script size 100 Bold color # ff78a0
Adjust> Add/Remove Noise> Add Noise> Uniform 20 Monochrome checked.
Shadow the name.
Merge Visible.
Save as PNG.

Thank you Cindy for allowing me to use your awesome kit and also a huge thank you to Titusboy25 for allowing use of his artwork.

TWI

Photobucket

Sunshine Daze Topsite

Sunshine Daze Topsites List

Vote Please

Photobucket

Fan Of

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Chat box

About Me

My Photo
SuthrnPrincess
I am a mom of 5 rambunctious and audacious kids. 1 girl and 4 boys. I started out tagging and fell in love with my PSP. I am with the most wonderful man in my world, George. If you make something with a mask or template I would love to see it. Please feel free to email me at georges_princess@yahoo.com. If you make a tutorial please link back to my blog for supplies do not include my materials nor link to my file share site. I would love to put your tutorial link on my blog so please feel free to email me :).
View my complete profile

My Blinkies

Photobucket Photobucket Photobucket

CT For

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Followers

Labels