Welcome & Disclaimer

Hello & welcome to SuthrnPrincess Tuts. I am so excited that you stopped in to see what I have made with the gorgeous tubes and fabby kits that are out there. You will find FTU & PTU kits as well as FTU & PTU Tubes are used in my tutorials. If you run into a problem on a tut please feel free to email me and I will help if I can. My use of a FTU tube does not give you permission to use it. I have obtained permission either from the artist themselves or through a group to use their artwork. You need to personally contact them to obtain permission before using.

**Disclaimer**

The tuts contained within this blog are my own creation. They came from my brain and were created by my own hand. Any resemblance to the works of others is completely coincidental.



Powered by Blogger.
Saturday, October 20, 2012

postheadericon Thankful PTU

 
 
Supplies:
 
PTU Kit Thankful by Designs by Sarah available at Pimp My Tags With Scraps.
 
Tube of choice. I used a Lady Mishka tube available at Pics For Design.
 
Font of choice. I used AS Melanie Handwriting.
 
 
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste frame 2.
 
Paste pp4. Image>Resize to 85%. Drag below the frame layer. Select the frame layer. Click inside of the frame layer with your wand tool. Selections> Modify> Expand by 10. Selections> Invert. Selections> Select None.
 
Paste tube of choice. Dupicate and hide 1 layer. Position the visible tub in the frame.
 
Effects> 3D Effects> Drop shadow: vertical 2, horizontal 2, opacity 50, blur 5, color black.
 
Select the paper layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on the keyboard. Selections> Select None.
 
Unhide duplicate. Drag to top layer. Image>Resize to 65%. Image> Mirror. Position to the right side of the frame.
 
Drop shadow same settings.
 
Paste ribbon3. Drag to the bottom layer.
 
Paste print1. Drag to the bottom layer. Position to the top right. Duplicate. Position at the bottom left.
 
Paste leaves2. Drag above the frame layer. Position at the bottom of the frame.
 
Drop shadow same settings.
 
Paste flower4. Image>Resize to 65%. Drag above the ribbon layer. Position towards the top left.
 
Drop shadow same settings.
 
Paste string1. Drag behind the tube layer. Position top left.
 
Drop shadow same settings.
 
Select the frame layer.
 
Drop shadow same settings.
 
Merge visible.
 
Image> Canvas size: 690 width by 610 height.
 
Recenter with pick tool.
 
Image>Resize to 650 width by 575 height.
 
Add copyright.
 
Add name with font of choice. I used AS Melanie Handwriting size 36 Bold color #d27c2a.
 
Drop shadow changing opacity to 100.
 
Merge visible.
 
Save as PNG.

postheadericon October Nights PTU

 
 
Supplies:
 
PTU Kit October Nights by Pimp'd Designz available at Pimp My Tags With Scraps.
 
Tube of choice. I used Zindy S.D. Nielsen available in her store.
 
Font of choice. I used Penshurst.
 
 
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste frame-01.
 
Paste pp-03. Image> Resize to 85%. Drag below the frame. Select the frame. Click inside of the frame with the wand tool. Selections> Modify> Expand by 10. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Paste tube of choice. Position in the frame. Select the paper layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on the keyboard. Selections> Select None.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 50, blur 5, color black.
 
Select the frame layer.
Drop shadow same settings.
 
Paste moon. Image> Resize to 75%. Drag to the bottom layer. Position at the top left.
 
Paste cloud. Drag below the moon layer. Position to the right.
Paste stars2. Drag to the bottom. Position to the right.
 
Paste ribbon-03. Drag to the top layer. Position at the bottom of the frame.
 
Drop shadow same settings.
 
Paste tree. Image>Resize to 65%. Drag to the bottom layer. Position top right.
 
Lower the opacity to 85.
 
Paste flower-03. Image>Resize to 55%. Drag to the top layer. Position at the bottom left.
 
Drop shadow same settings.
 
Paste candles-01. Drag behind the flower layer. Position behind and to the right of he flower.
 
Drop shadow same settings.
 
Merge visible.
 
Image> Canvas Size 700 width by 645 height.
 
Recenter with pick tool.
 
Image>Resize to 650 width by 599 height.
 
Add copyright.
 
Add name with font of choice. I used Penhurst size 48 Bold color #d27c2a.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 25 monochrome checked.
 
Drop shadow changing opacity to 100 and blur to 6.
 
Merge visible.
 
Save as PNG.

postheadericon Autumn Ablaze PTU

 
Supplies:
 
PTU Kit Autumn Ablaze by Skulliez Skrapz available at Pimp My Tags With Scraps.
 
Autum Template by Tracy.F Tempalte Designz available on the Freebie Friends & More blog.
 
Tube of choice. I used Ismael Rac available in his store.
 
Font of choice. I used Pea Biggio.
 
 
 
 
 
 
 
Let's Get Started:
 
Open template in psps.
 
Shift + D.
 
Close the original template.
 
Delete Tracy.FDesignz layer.
 
Image>Resize to 650 width by 644 height.
 
Hide corner layer.
 
Paste pp5. Image>Resize to 80%. Drag above the frame layer. Select the frame layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 50 monochrome checked.
 
Delete the frame layer.
 
Paste pp16. Drag above the circle layer. Select the circle layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None.
Delete the circle layer.
 
Paste pp14. Drag above the dotted circle layer. Select the dotted circle layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 50 monochrome checked.
Delete the dotted circle layer.
 
Paste pp13. Drag above the square layer. Select the square layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None.
Delete the square layer.
 
Paste tube. Drag behind the frame layer.
 
Effects> 3D Effects> Drop shadow: vertical 2, horizontal 2, opacity 50, blur 5, color black.
 
Position in the frame as desired. Select the square layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on your keyboard. Selections> Select None.
 
Merge down.
 
Paste tube again. Image> Resize to 80%. Image> Mirror.
 
Drop shadow same settings.
 
Drag above the circle layer. Position in the circle as desired. Select the circle layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on your keyboard. Selections> Select None.
 
Change the blend mode to Luminance.
 
Merge down.
 
Select the frame layer.
 
Drop shadow same settings.
 
Select the corner layer.
 
Drop shadow same settings.
 
Select the circle layer.
 
Adjust> Softness> Soften.
 
Drop shadow same settings.
 
Select the dotted circle.
 
Drop shadow same settings.
 
Paste wordbit2. Image>Resize to 85%. Drag to the top layer. Position centered over the left side of the frame.
 
Drop shadow same settings.
 
Paste wordbit1. Image> Resize to 85%. Position at the bottom of the frame off centered to the left.
 
Drop shadow same settings.
 
Paste wordbitblank. Image> Resize to 85%. Position near the top of the frame off centered to the left.
 
Drop shadow same settings.
 
Paste ties. Image> Resize to 65%. Image> Free Rotate to the left 90 degrees. Drag above the corner layer. Position behind the wordbits layers.
 
Drop shadow same settings.
 
Paste rope. Drag to the bottom layer. Position to the left.
 
Paste wreath. Image> Resize to 50%. Drag below the corner layer. Position at the bottom left corner of the frame.
 
Drop shadow same settings.
 
Paste pumpkin3. Image> Resize to 35%. Drag to the top layer. Position at the bottom right corner of the frame.
 
Drop shadow same settings.
 
Paste pumpkin1. Image> Resize to 35%. Drag behind the corner. Position to the left of pumpkin 3.
 
Drop shadow same settings.
 
Paste key. Image> Resize to 50%. Drag behind the top pumpkin layer. Position behind the pumpkin.
 
Drop shadow same settings.
 
Paste flower3. Image>Resize to 85%. Position at the top right of the frame.
 
Dop shadow same settings.
 
Paste owl. Image> Resize to 25%. Position at the top left of the blank wordbit layer.
 
Drop shadow same settings.
 
Paste butterfly. Image>Resize to 25%. Drag above the flower layer. Position over the center of the flower.
 
Drop shadow same settings.
 
Merge visible.
 
Add copyright.
 
Add name using font of choice. I used Pea Biggio size 30 color #4e1d00.
 
Drop shadow same settings.
 
Merge visible.
 
Save as PNG.

postheadericon Tragic Romance PTU

 
 
Supplies:
 
PTU Kit Tragic Romance by Pimp'd Designz available at Pimp My Tags With Scraps.
 
Tube of choice I used Ismael Rac.
 
Font of choice. I used PeaSqueaker.
 
 
 
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste frame-03.
 
Paste pp-06. Image>Resize to 85%. Drag behind the frame layer. Select the frame layer. Click inside of the frame with your wand tool. It will not select the entire inside of the frame and that is okay. Selections> Modify> Expand by 40. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None. Use your pick tool to center the paper behind the frame.
 
Paste ribbon-04. Drag to te bottom layer. Image> Resize to 85%.
 
Paste swirl-01. Drag to the bottom layer.
 
Paste tulle-01. Position at the bottom.
 
Lower layer opacity to 70.
 
Paste print-01. Image>Resize to 95%. Position at the top.
 
Paste apple. Image>Resize to 35%. Drag to the to layer. Position at the bottom left.
 
Effects> 3D Effects> Drop shadow: vertical 2, horizontal 2, opacity 50, blur 5, color black.
 
Paste bottle. Image>Resize to 45%. Drag to behind the paper layer. Position to the left.
 
Drop shadow same settings.
 
Paste key. Image> Resize to 50%. Drag behind the apple layer.Position behind the apple.
 
Drop shadow same settings.
 
Paste leaves-01. Image> Flip. Drag below the ribbon laye. Position to the bottom right.
 
Paste tube. Drag above paper layer. Position in frame as desired.
 
Drop shadow same settings.
 
Duplicate. Drag duplciate above the frame layer.
 
Select the paper layer. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the bottom tube layer and hit the delete key on your keyboard. Selections> Select None.
 
Select top tube layer. Erase the bottom of the tube that is over the frame.
 
Paste music-sheet. Image>Resize to 35%. Drag behind the ribbon layer. Position to the bottom left.
 
Drop shadow same settings.
 
Paste butterfly. Image>Resize to 35%. Drag above the paper layer. Position to the left of the tube.
 
Lower layer opacity to 75.
 
Duplicate. Image> Mirror.
 
Paste leaves-02. Drag above the ribbon layer. Position at the top. Erase the bottom.
 
Drop shadow same settings.
 
Paste feather. Image>Resize to 65%. Image>Mirror. Position at the bottom of the frame.
 
Paste petals-02. Image>Resize to 10%. Drag above the bottle layer. Position at the bottom of the music sheet and the bottle.
 
Drop shadow same settings.
 
Merge visible.
 
Image> Canvas Size: 670 width by 645 height.
 
Recenter with pick tool.
 
Image>Resize to 650 width by 626 height.
 
Add copyright.
 
Add name with font of choice.  used PeaSqueaker size 30 color #c7bd96.
 
Merge visible.
 
Save as PNG.

postheadericon My Vamp Love PTU

 
 
Supplies:
 
PTU Kit My Vamp Love by Pimp'd Designz available at Pimp My Tags With Scraps.
 
Tube of choice. I used Zindy S.D. Nielsen available at her store.
 
Font of choice. I used Yorstat.
 
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste frame-01. Image>Resize to 95%.
 
Paste pp-02. Image>Resize to 65%. Drag under the frame layer. Select the frame layer. Click inside the frame with the wand tool. Selections> Modify> Expand by 10. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None.
 
Paste tube layer. Position in the frame. Select the paper. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on your keyboard. Selections> Select None.
 
Select the frame layer.
 
Effects> 3D Effects> Drop shadow: vertical 2, horizontal 2, opacity 50, blur 5, color black.
 
Paste flower-03. Image>Resize to 50%. Position at the bottom center.
 
Drop shadow same settings.
 
Paste greens-02. Image>Resize to 85%. Drag to the bottom. Position towards the left top. Duplicate. Image> Mirror.
 
Drop shadow both same settings.
 
Paste key. Drag above the frame layer. Position behind the rose.
 
Drop shadow same settings.
 
Paste mesh-01. Image>Resize to 85%. Drag to the bottom layer. Position at the bottom.
 
Lower layer opacity to 75.
 
Paste blood-03. Position to the left. Duplicate. Image> Mirror.
 
Paste books. Image>Resize to 60%. Drag above the frame layer. Position at the bottom.
 
Drop shadow same settings.
 
Paste bottle-01. Image>Resize to 35%. Drag behind the books layer. Position to the left.
 
Drop shadow same settings.
 
Paste bottle-02. Image>Resize to 35%. Image> Mirror. Position to the right of the books.
 
Drop shadow same settings.
 
Merge visible.
 
Image> Canvas Size: 690 width by 610 height.
 
Recenter with pick tool.
 
Image> Resize t 650 width by 575 height.
 
Add copyright.
 
Add name. I used Yorstat size 60 Bold #df1321.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 20 monochrome checked.
 
Drop shadow changing opacity to 75.
 
Merge visible.
 
Save as PNG.
Friday, October 19, 2012

postheadericon Happy Fall PTU

 
 
 
Supplies:
 
PTU Kit Happy Fall by Bibi's Collection available at Scraps & the City.
 
Tube of choice. I used Jose Cano available at Scraps & the City.
 
Font of choice. I used !TheBlackBloc.
 
 
 
 
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste Elems(2).
 
Paste Papers(14). Image>Resize to 50%. Drag below the frames layer. Select the frames layer. Click inside of the frames with the wand tool. Selections> modify> Expand by 5. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None.
 
Paste tube. Duplicate. Hide 1 layer. Position the visible layer in the frames. Select the paper layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on your keyboard. Selections> Select None.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 50, blur 5, color black.
 
Select the frame layer.
 
Drop shadow same settings.
 
Unhide the duplicate tube. Image> Mirror. Drag to the top layer. Image>Resize to 80%. Position to the right side of the frames.
 
Drop shadow same settings.
 
Paste Elems(12). Drag behind the tube layer.Position to the left of the tube where the two frames meet.
 
Drop shadow same settings.
 
Paste Elems(23). Image>Resize to 70%. Drag to the bottom layer. Position behind the frames at the bottom.
 
Paste Elems(5). Drag above the frame layer. Position at the bottom.
 
Drop shadow same settings.
 
Paste Elems(22). Image>Resize to 65%. Drag to the bottom.
 
Paste Elems(42). Image>Resize to 50%. Drag above the grass layer. Position over the grass.
 
Drop shadow same settings.
 
Paste Elems(40). Image>Resize to 50%. Drag behind the tube layer. Position behind and to the left of the tube.
 
Drop shadow same settings.
 
Duplicate. Drag behind the leaves. Position to the left of the frame.
 
Paste Elems(11). Image>Resize to 50%. Drag above the ribbon layer. Position at the bottom of the frame.
 
Paste Elems(57). Image>Resize to 65%. Position with front paws on the acorn. Duplicate. Drag under the acorn layer.
 
Drop shadow same settings.
 
Select the top squirrel layer. Erase the back feet.
 
Paste Elems(58). Image>Resize to 55%. Drag to behind the grass layer. Position to the left.
 
Drop shadow same settings.
 
Paste Elems(46). Image>Resize to 85%. Drag to the bottom layer. Position as desired. I erased the top set of leaves.
 
Paste Elems(70). Image>Resize to 75%. Drag to the bottom layer. Position towards the top.
 
Lower the layer opacity to 75%.
 
Paste Elems(72). Drag to the bottom layer. Position to the bottom right.
 
Paste Elems(20). Drag to the bottom. Position in the center.
 
Paste Elems(59). Image>Resize to 25%. Drag behind the tube layer. Position to the left of the top frame.
 
Drop shadow same settings.
 
Paste Elems(50). Image>Resize to 50%. Drag to the bottom layer. Position at the top of the frame.
 
Merge visible.
 
Image> Canvas Size: 700 width by 665 height.
 
Recenter with pick tool.
 
Image>Resize to 650 width by 618 height.
 
Add copyright.
 
Add name with font of choice. I used !TheBlackBloc size 72 Bold color #b96746.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 25 monochrome checked.
 
Drop shadow: vertical 3, horizontal 3, opacity 75, blur 7, color black.
 
Merge visible.
 
Save as PNG.
 
 

postheadericon Blood Bond PTU

 
Supplies:
 
PTU Kit Blood Bond by Pimp'd Designz available at Pimp My Tags With Scraps.
 
Tube of choice. I used Ismael Rac available at his store.
 
Font of choice. I used Zirkon.
 
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste frame-04.
 
Paste pp-04. Image>Resize to 85%. Drag below the frame layr. Select the frame layer. Click inside of the frame layer with the wand tool. Selections> Modify> Expand by 10. Selections> Invert. Select the paper layer. Hit the delete key on your keyboard. Selections> Select None.
 
Paste tube of choice. Position in the frame.
 
Effects> 3D Effects> Drop shadow: vertical 2, horizontal 2, opacity 50, blur 5, color black.
 
Duplicate tube layer. Drg duplicate above the frame. Select the paper layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the bottom tube layer and hit the delete key on your keyboard. Selections> Select None.
 
Select the top tube layer. Erase the bottom portion of the tube that is over the frame.
 
Paste moon. Image> Resize to 85%. Drag to the bottom. Position at the top left of the frame.
 
Paste ribbon-02. Image>Resize to 90%. Drag to the top layer. Position at the bottom of the frame.
 
Drop shadow the same settings.
 
Paste blood-02. Image>Resize to 65%. Drag to the bottom layer. Position at the top. Duplicate. Image> Mirror. Image> Flip.
 
Paste mesh-01. Image>Resize to 65%. Position at the bottom.
 
Paste cloud. Drag to the bottom layer. Position near the bottom.
 
Merge visible.
 
Image> Canvas Size: 665 width by 615 height.
 
Recenter with pick tool.
 
Image>Resize to 650 width by 610 height.
 
Add copyright.
 
Add name. I used Zirkon size 72 Bold color #a8080b.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 15 monochrome checked.
 
Drop shadow: vertical 3, horizontal 3, opacity 75, blur 5 color black.
 
Merge visible.
 
Save as PNG.
Thursday, October 18, 2012

postheadericon My Immortal II PTU

 
Supplies:
 
PTU Kit My Immortal II by Pimp'd Designz available at Pimp My Tags With Scraps.
 
Tube of choice. I used Zindy S. D. Nielsen available at her store.
 
Font of choice. I used Auburn.
 
 
 
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste frame-01.
 
Paste pp-07. Image>Resize to 85%. Select the frame layer. Click inside of the frame with the wand tool. Make sure the entire inside of the frame is selected. Selections> Modify> Expand by 10. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Paste tube of choice. Position in frame as desired. Select the paper. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on the keyboard. Selections> Select None.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 50, blur 5, color black.
 
Paste splatter-02. Drag to the bottom.
 
Paste ribbon-04. Image>Resize to 75%. Drag above the frame layer. Position bow at the bottom right corner of the frame.
 
Drop shadow same settings.
 
Duplicate. Drag below the paper layer. Select the top ribbon layer. Erase the right side of the ribbon.
 
Paste print-04. Drag below the ribbon layer. Position on the left. Duplicate. Image> Mirror. Position as desired on the right.
 
Paste splatter-03. Image>Resize to 80%. Drag behind the top ribbon layer. Position over the right side of the frame.
 
Paste moon. Image>Resize to 85%. Drag above the splatter layer.
 
Paste key. Image>Resize to 65%. Drag above the frame layer. Position over the left side of the frame.
 
Drop shadow same settings.
 
Paste heart-02. Image>Resize to 40%. Drag behind the key layer. Position at the bottom of the key.
 
Paste clock-01. Image>Resize to 75%. Drag behind the heart layer. Position behind the key and heart.
 
Drop shadow same settings.
 
Paste blood-03. Drag to the bottom layer. Image> Mirror. Position at the bottom of the frame.
 
Paste fog. Drag below the frame layer. Position as desired. Select the paper. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the fog layer and hit the delete key on the keyboard. Selections> Select None.
 
Paste candle-01. Image>Resize to 50%. Drag above the clock layer and position to the right of the heart.
 
Drop shadow same settings.
 
Paste book-02. Image> Resize to 65%. Drag behind the clock layer. Position behind the clock.
 
Drop shadow same settings.
 
Merge visible.
 
Image> Canvas Size: 675 width by 640 height.
 
Recenter with pick tool.
 
Image>Resize to 650 width by 616 height.
 
Add copyright.
 
Add name with font of choice. I used Aubirn size 72 Bold color #a8080b.
 
Drop shadow same settings.
 
Merge visible.
 
Save as PNG.

postheadericon My Darkside PTU

 
 
Supplies:
 
PTU kit My Dark Side by Pimp'd Designz available at Pimp My Tags With Scraps.
 
Tube of choice. I used Tim Lowery available at Artistically Inclined Licensing.
 
Font of choice. I used Theodoric.
 
 
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste frame-01.
 
Paste pp-01. Image>Resize to 75%. Drag behind the frame layer. Select the frame layer. Click inside of the frame layer with wand tool. Selections> Modify> Expand by 10. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None.
 
Paste tube of choice. Image>Resize to 75%. Position in the frame. Select the paper layer. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on the keyboard. Selections> Select None.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 50, blur 5, color black.
 
Select the frame.
 
Drop shadow same settings.
 
Paste ribbon-01. Image> Resize to 85%. Drag to the top layer. Position at the bottom of the frame.
 
Drop shadow same settings.
 
Paste print-02. Drag to the bottom.
 
Paste moon. Image>Resize to 85%. Position to the left.
 
Paste leaf-01. Drag under the moon layer. Position at the bottom of the frame.
 
Drop shadow same settings.
 
Paste key. Image>Resize to 85%. Drag to the top layer. Position at the bottom of the frame.
 
Drop shadow same settings.
 
Paste feather. Drag above the moon layer. Position at the bottom left of the frame. Duplicate. Image> Mirror.
 
Paste splatter-02. Drag to the bottom. Position to the left. Duplicate. Image> Mirror. Image> Flip.
 
Merge visible.
 
Image> Canvas Size: 635 width by 670 height.
 
Recenter with pick tool.
 
Image> Resize to 616 width by 650 height.
 
Add copyright.
 
Add name with font of choice. I used Theodoric size 72 Bold color #a8080b.
 
Effects> 3D Effects> Inner Bevel: Bevel 4, width 3, smoothness 15, depth 1 ambience -6, shininess 28, color white, angle 135, intensity 25, elevation 60.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 10 monochrome checked.
 
Drop shadow: vertical 3, horizontal 3, opacity 75, blur 6, color black.
 
Merge visible.
 
Save as PNG.
Wednesday, October 17, 2012

postheadericon Amusement PTU

 
 
Supplies:

PTU kit Amusement by Pimp'd Desigz available at Pimp My Tags With Scraps.
 
Tube of choice. I used Zindy S.D. Nielsen available at her store.
 
Font of choice. I used WorstVeldSling.
 
 
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste tube of choice. Drag behind the frame layer. Select the frame layer. Click inside of the frame with the wand tool. Selections> Modify> Expand by 10. Selections> Invert. Select the tube layer and hit the delete key on your keyboard.
 
Select the frame layer.
 
Effects> 3D Effects> Drop shadow: vertical 2, horizontal 2, opacity 50, blur 5, color black.
 
Paste Ribbon-01. Image>Resize to 75%. Image> Mirror. Position near the bottom inside of the frame. Duplicate. Drag below the frame layer. Shadow with the same settings. Erase the ends sticking out of the frame. Select the top ribbon. Drop shadow same settings. Erase the ends over the frame.
 
Paste mesh-01. Drag to the bottom. Position at the bottom of the frame.
 
Lower the opacity to 65%.
 
Paste lights-01. Image>Resize to 85%. Drag behind the top ribbon layer. Position at the bottom of the frame.
 
Drop shadow same settings.
 
Paste glitter-01. Image>Resize to 85%. Drag above the mesh layer.
 
Paste flower-03. Image>Resize to 35%. Drag to the top layer. Position at the top left of the frame.
 
Paste clouds. Drag above the mesh layer. Position at the bottom.
 
Paste ribbon-02. Image>Resize to 35%. Drag to the top layer. Position over the center of the flower.
 
Drop shadow same settings.
 
Merge visible.
 
Image> Canvas Size: 685 width by 600 height.
 
Recenter with pick tool.
 
Image> Resize to 650 width by 569 height.
 
Add copyright.
 
Add name with font of choice. I used WorstVeldSling size 72 Bold color #f796c5.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 10 monochrome checked.
 
Drop shadow changing opacity to 75.
 
Merge visible.
 
Save as PNG.

postheadericon Vampire Girl PTU

 
 
 
Supplies:
 
PTU kit Vampire Girl by Pimp'd Designz available at Pimp My Tags With Scraps.
 
Tube of choice. I used a tube by Zindy S. D. Nielsen available at her store.
 
Font of choice. I used Belphebe.
 
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste frame04.
 
Paste tube of choice. Drag under frame. Position in the frame as desired. Select the frame layer. Click inside of the frame with wand tool. Selections> Modify> Expand by 10. Selections> Invert. Select the tube layer and hit the delete key on your keyboard. Selections> Select None.
 
Paste moon. Drag to the boom layer. Position at the top left of the frame.
 
Paste greens03. Position at the bottom of the frame. Duplicate. Image> Mirror.
 
Merge down.
 
Effects> 3D Effects> Drop shadow: vertical 2, horizontal 2, opacity 50, blur 5, color black.
 
Paste glitter circle. Drag to the bottom layer.
 
Paste ribbon 04. Image>Free Rotate to the right 90 degrees. Image>Resize to 85%. Drag to the top layer. Position at the bottom of the frame.
 
Drop shadow same settings.
 
Paste sparkle.
 
Paste tree. Drag above the moon layer. Position at the top.
 
Paste bead-01. Image>Resize to 90%. Drag behind the bow layer. Position at the bottom. Erase the top bead.
 
Paste feather. Image>Resize to 65%. Position at about midway down the left side of the frame. Duplicate. Image> Mirror. Position a little further down the right side of the frame.
 
Merge visible.
 
Image> Canvas Size: 615 width by 700 height.
 
Recenter with pick tool.
 
Image>Resize to 571 width by 650 height.
 
Add copyright.
 
Add name with font of choice. I used Belphebe size 72Bold color #4c96b8.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 15 monochrome checked.
 
Drop shadow changing opacity to 75 and blur to 3.
 
Merge visible.
 
Save as PNG.

TWI

Photobucket

Sunshine Daze Topsite

Sunshine Daze Topsites List

Vote Please

Photobucket

Fan Of

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Chat box

About Me

My Photo
SuthrnPrincess
I am a mom of 5 rambunctious and audacious kids. 1 girl and 4 boys. I started out tagging and fell in love with my PSP. I am with the most wonderful man in my world, George. If you make something with a mask or template I would love to see it. Please feel free to email me at georges_princess@yahoo.com. If you make a tutorial please link back to my blog for supplies do not include my materials nor link to my file share site. I would love to put your tutorial link on my blog so please feel free to email me :).
View my complete profile

My Blinkies

Photobucket Photobucket Photobucket

CT For

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Followers

Labels