Welcome & Disclaimer

Hello & welcome to SuthrnPrincess Tuts. I am so excited that you stopped in to see what I have made with the gorgeous tubes and fabby kits that are out there. You will find FTU & PTU kits as well as FTU & PTU Tubes are used in my tutorials. If you run into a problem on a tut please feel free to email me and I will help if I can. My use of a FTU tube does not give you permission to use it. I have obtained permission either from the artist themselves or through a group to use their artwork. You need to personally contact them to obtain permission before using.

**Disclaimer**

The tuts contained within this blog are my own creation. They came from my brain and were created by my own hand. Any resemblance to the works of others is completely coincidental.



Powered by Blogger.
Friday, March 15, 2013

postheadericon Master Key In Blue PTU

 
Supplies:
 
Tube of choice. I used Ninaste available at Scraps & the City.
 
PTU kit Cerulean Dreams by Tiny Turtle Designs available at Scraps & the City.
 
Font of choice. I used Shit Happens.
 
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste 112.
 
Paste 5 jpg. Image> Resize to 85%. Drag below the frame. Select the frame. Click inside of the frame with the wand tool. Selections> Modify> Expand by 10. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Select the frame.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 30, blur 5, color black.
 
Paste close-up tube. Image> Resize to 85%. Drag below the frame. Position in the top frame. Select the paper layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on the keyboard. Selections> Select None.
 
Change the tube blend mode to Luminance.
 
Adjust> Softness> Soften.
 
Merge down.
 
Paste tube. image> Resize to 75%. Position in the bottom frame as desired. Drop shadow changing the opacity to 25. Duplicate. Drag above the frame. Erase the bottom of both tubes.
 
Paste 66. Drag to the top. Position at the bottom.
 
Drop shadow changing the opacity to 20.
 
Paste 69. Image> Resize to 50%. Position at the bottom.
 
Drop shadow same settings.
 
Paste 73. Image> Resize to 35%. Drag below the flower cluster layer. Position to the left. Erase the stars that aren't on the envelope.
 
Drop shadow changing the opacity to 25.
 
Paste 81. Image> Resize to 25%. Position to the left of the top frame.
 
Drop shadow same settings.
 
Paste 124. Image>Resize to 95%. Drag to the bottom. Position at the bottom.
 
Lower the layer opacity to 75.
 
Paste 62. position at the top right.
 
Paste 59. Image>Resize to 65%. Drag above the top tube. Position to the left of the top frame.
 
Drop shadow same settings.
 
Paste 70. Image>Resize to 25%. Drag below the envelope. Position to the left of the envelope.
 
Drop shadow same settings.
 
Paste 119. Image>Resize to 25%. Image> Mirror. Position to the bottom right.
 
Drop shadow same settings.
 
Paste 29. Image>Resize to 15%. Drag below the paper layer. Position to the top left of the bottom frame.
 
Drop shadow same settings.
 
Paste 12. Drag to the top. Position to the top of the top frame.
 
Drop shadow same settings.
 
Paste 53. Image>Resize to 50%. Drag behind the hat layer. Position to the left of the hat.
 
Drop shadow changing the opacity to 35.
 
Paste 54. Image> Resize to 35%. Position to the right of the bottom frame.
 
Drop shadow same settings.
 
Paste 10. Image>Resize to 35%. Drag below the rose. position to the left of the rose.
 
Drop shadow changing the opacity to 40.
 
Merge visible.
 
Image> Canvas Size: 670 width by 660 height.
 
Recenter with pick tool.
 
Image> Resize to 650 width by 640 height.
 
Add copyright.
 
Add name with font of choice. I used Shit Happens size 58 color black.
 
Drop shadow changing the opacity to 100.
 
Merge visible.
 
Save as PNG.
 
 
 

postheadericon Kiss My Irish PTU

 
 
Supplies:
 
PTU kit Irish Pride by Creative Intentionz available at The PSP Project.
 
Template 204 by Millies PSP Madness.
 
Tube of choice. I used Shawli available at The PSP Project.
 
PlugIns: Xero.
 
Font of choice. I used Vladimir Script.
 
 
 
 
 
 
Let's Get Started:
 
Open template in psp.
 
Shift + D.
 
Close the original.
 
Delete the Raster 1 and 6 layers and the background layer.
 
Paste Paper 8. Image> Resize to 85%. Select 1. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Delete 1.
 
Paste Paper 7. Drag above 5. Select 5. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Delete 5.
 
Paste Paper 6. Image> Resize to 85%. Drag above 3. Select 3. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Delete 3.
 
Paste Paper 3. Image> Resize to 85%. Drag abov 8. Select 8. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Delete 8.
 
Select the dotted rectangles layer.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 50 monochrome checked.
 
Paste Paper 3 again. Image> Resize to 85%. Drag above 7. Select 7. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Delete 7.
 
Paste tube. Drag above 4. Position over 4.
 
Effects> PlugIns> Xero> Porcelain: Softness 50, Strength 128, Brightness 128, Red Channel 0, Green Channel 0, Blue Channel 255.
 
Duplicate.
 
Change the top layer blend mode to Soft Light.
 
Merge Down.
 
Effects> 3D Effects> Drop Shadow> vertical 2, horizontal 2, opacity 30, blur 5, color black.
 
Select 4. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on the keyboard. Selections> Select None.
 
Change the blend mode to Luminance(L).
 
Merge down.
 
Paste tube again. Porcelain to the same settings. Duplicate. Change the blend mode to Soft Light.
 
Merge down.
 
Drag above the double rectangle layer. Position over the bottom rectangle. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Change the blend mode to Hard Light.
 
Merge down.
 
Paste tube again. Image> Mirror. Porcelain to the same settings. Duplicate. Change the blend mode to Soft Light.
 
Merge down.
 
Drag above the double rectangle layer. Position over the top rectangle. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Change the blend mode to Hard Light.
 
Merge down.
 
Select 2.
 
Drop shadow changing the opacity to 75.
 
Select the dotted rectangles.
 
Drop shadow changing the opacity to 40.
 
Select the double rectangle layer.
 
Adjust> Softness> Soften.
 
Drop shadow same settings.
 
Select the slanted rectangle layer.
 
Adjust> Softness> Soften.
 
Drop shadow changing the opacity to 45.
 
Select the top thin rectangle.
 
Soften.
 
Drop shadow changing the opacity to 50.
 
Select the second big rectangle.
 
Soften.
 
Drop shadow changing the opacity to 55.
 
Select the bottom thin rectangle.
 
Soften.
 
Drop shadow changing the opacity to 60.
 
Paste Ribbon 1. Drag below the top thin rectangle. Position to the left.
 
Drop shadow changing the opacity to 40.
 
Paste Rainbow. Image> Resize to 75%. Drag below the double rectangle. Position at the bottom.
 
Paste Pot Of Gold. Image> Resize to 50%. Drag to the top. Position at the bottom left.
 
Drop shadow changing the opacity to 30.
 
Paste Swirl 1. Image> Resize to 80%. Drag to the bottom layer.
 
Paste Hat. Image> Resize to 25%. Drag to the top layer. Position at the bottom left.
 
Drop shadow same settings.
 
Paste Curly Ribbon 2. Image> Resize to 50%. Drag behind the wordart layer. Position at the bottom right.
 
Drop shadow changing the opacity to 25.
 
Paste Butterflies 2. Image> Mirror. Drag to the bottom. Position at the top right.
 
Merge visible.
 
Image> Resize to 452 width by 650 height.
 
Add copyright.
 
Add name with font of choice. I used Vladimir Script size 72 Bold color #dccb69.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 15 monochrome checked.
 
Drop shadow changing the opacity to 75.
 
Merge visible.
 
Save as PNG.
Thursday, March 14, 2013

postheadericon Kiss Me I'm Irish PTU

 
Supplies:
 
PTU Kelly Green by Designs by Sarah available at Pimp My Tags With Scraps.
 
Tube of choice. I used Elias Chatzoudis available in his store.
 
PlugIns: Xero.
 
Font of choice. I used Agatha.
 
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste frame 2.
 
Paste pp2. Image> Resize 85%. Drag below the frame. Select the frame. Click inside of the frame with the wand tool. Selections> Modify> Expand by 5. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Paste tube close-up. Position in the frame.
 
Effects> PlugIns> Xero- Porcelain: Softness 50, Strength 128, Brightness 128, Red Channel 0, Green Channel 0, Blue Channel 255.
 
Duplicate.
 
Change the top tube layer blend mode to Screen.
 
Merge down.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 30, blur 5, color black.
 
Select the paper layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on the keyboard. Selections> Select None.
 
Change the blend mode to Luminance(L).
 
Merge down.
 
Paste tube. Drag above the frame and position to the right.
 
Porcelain same settings.
 
Duplicate.
 
Change the top layer blend mode to Screen.
 
Merge down.
 
Drop shadow same settings.
 
Paste wordart1. Position at the bottom.
 
Drop shadow changing opacity to 25.
 
Paste glittertrail. Image> Resize to 85%. Drag behind the wordart. Position at the bottom.
 
Paste clipboardbuttonshamrock. Position at the top.
 
Drop shadow same settings.
 
Paste potofgold. Image> Resize to 85%. Position at the bottom left.
 
Drop shadow same settings.
 
Merge visible.
 
Image> Canvas Size: 600 width by 635 height.
 
Recenter with pick tool.
 
Add copyright.
 
Add name. I used Agatha size 72 color #2c452a.
 
Drop shadow changing opacity to 100.
 
Merge visible.
 
Save as PNG.

postheadericon The Belief In Fairies FTU

 
 
 
Supplies:
 
FTU A Fairy's Fantasy by Tarnished Halo Designs.
 
Tube of choice. I used Chiichanny available at Scraps & the City.
 
Font of choice. I used Annabel Script.
 
PlugIns: Xero.
 
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste Bracket Frame.
 
Paste Paper2. Select the frame. Click inside of the frame with the wand tool. Make sure to select the entire inside of the frame.  Selections> Modify> Contract by 2. (You will have to modify as you see fit to make the paper work in the bracket). Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Paste tube. Position in the bracket frame as desired. Select the paper. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on the keyboard. Selections> Select None.
 
Select the frame and duplicate.
 
Merge the two frame layers together.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 40. blur 5, color black.
 
Paste WordartBeliefinFairies. Position at the bottom of the frame. Duplicate. Select the bottom wordart layer.
 
Effects> 3D Effects> CutOut: vertical 10, horizontal 10, opacity 50, blur 5, shadow color white, fill interior with color- white.
 
Change the layer position x & y up 1 (mine was Position X: 85 and Position Y: 482). This is located in my tool bar at the top of psp.
 
Drop shadow changing opacity to 50.
 
Select the top wordart.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 30 monochrome checked.
 
Merge down.
 
Select the tube.
 
Effects> PlugIns> Xero> Porcelain: softness 50, strength 128, brightness 128, red channel 0, green channel 0, blue channel 255.
 
Duplicate.
 
Change the blend mode on the top layer to Soft Light.
 
Merge down.
 
Paste Wings 2. Image> Resize to 85%. Drag to the bottom. Position to the left. Duplicate. Image> Mirror.
 
Paste vine. Drag above the frame layer. Position to the left. Duplicate. Mirror.
 
Drop shadow both changing opacity to 25.
 
Erase the bottoms of both vines.
 
Paste Swirl 2. Drag to the bottom. Position top right. Duplicate. Mirror. Image> Flip.
 
Paste Ribbon. Drag below the wordart. Position at the bottom.
 
Drop shadow same settings.
 
Paste Butterflies. Image> Resize to 50%. Drag below the paper layer Position at the top right. Duplicate. Mirror. Flip.
 
Merge visible.
 
Image> Canvas Size: 685 width by 670 height.
 
Recenter with pick tool.
 
Image> Resize to 650 width by 636 height.
 
Add copyright.
 
Add name with font of choice. I used Annabel Script size 72 Bold color #b560f4.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 10 monochrome checked.
 
Drop shadow changing the opacity to 75.
 
Merge visible.
 
Save as PNG.

postheadericon Easter Bliss FTU

 
 
Supplies:
 
FTU kit Easter Bliss by Scraps Dimensions
 
Tube of choice. I used Irmino Pin-Oops available at Scraps & the City.
 
PlugIns: Xero.
 
Font of choice. I used ALS Script.
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste Frame 4. Image> Resize to 75%.
 
Paste Frame 1. Image> Resize to 65%. Position over the top frame. Duplicate. Image> Mirror. Image> Flip.
 
Paste Paper12. Image> Resize to 75%. Drag to the bottom. Select the frame layer. Click inside of the frame with the wand tool. Selections> Modify> Expand by 5. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Paste Close-up of tube. Position in the top frame.
 
Effects> PlugIns> Xero- Porcelain: Softness 50, Strength 128, Brightness 128, Red Channel 0, Green Channel 0, Blue Channel 255.
 
Duplicate.
 
Change the top tube layer blend mode to Soft Light.
 
Merge down.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 35, blur 5, color black.
 
Duplicate.
 
Select the frame layer. Click inside of the top frame with the wand tool. Selections> Modify> Expand by 5. Selections> Invert. Select the top tube layer and hit the delete key on the keyboard. Selections> Select None.
 
Select the duplicate layer. Image> Mirror. Position in the bottom frame.
 
Select the frame layer. Click inside the bottom frame with the wand tool. Selections> Modify> Expand by 5. Selections> Invert. Select the tube layer and hit the delete key on the keyboard. Selections> Select None.
 
Merge the tube layers together.
 
Change the blend mode on the tube layer to Luminance.
 
Merge down.
 
Paste full tube. Image> Resize to 65%. Drag to the top layer. Position in the center.
 
Drop shadow changing opacity to 25.
 
Select the top flower frame.
 
Drop shadow changing opacity to 30.
 
Select the bottom flower frame.
 
Drop shadow same settings.
 
Select the double frame.
 
Drop shadow changing the opacity to 35.
 
Paste Ducks. Image> Resize to 25%. Drag to the top. Position at the tubes feet.
 
Drop shadow changing the opacity to 20.
 
Paste basket. Image> Resize to 25%. Position at the bottom right.
 
Drop shadow same settings.
 
Paste sun. Image> Resize to 25%. Drag to the bottom. Position top left.
 
Paste Bow. Image>Resize to 35%. Drag to the top. Position at the top right of the top frame.
 
Drop shadow same settings.
 
Paste Ribbon 5. Image> Resize to 75%. Drag below the tube layer. Position at the bottom.
 
Drop shadow same settings.
 
Paste leaves 2. Image> Resize to 85%. Drag to the bottom. Position at the bottom.
 
Paste flower 6.
 
Drop shadow changing the opacity to 40.
 
Paste Eggs. Image> Resize to 25%. Drag behind the ducks. Position at the bottom left.
 
Drop shadow changing the opacity to 25.
 
Merge visible.
 
Image> Canvas Size: 690 width by 675 height.
 
Recenter with pick tool.
 
Image> Resize: 650 width by 636 height.
 
Add copyright.
 
Add name with font of choice. I used ALS Script size 72 Bold color #f42d82.
 
Adjust> Add/Remove Noise> Add Noise 15 monochrome checked.
 
Drop shadow changing the opacity to 70.
 
Merge visible.
 
Save as PNG.
Monday, March 11, 2013

postheadericon Easter Pastel PTU

 
 
PTU kit Easter Tube by Black Widow Creationz available at Scraps & the City
 
Tube of choice. I used the matching tube by Gary Rudisill available at Scraps & the City.
 
PlugIns: Xero.
 
Font of choice. I used Verdana.
 
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste EL35.
 
Paste PP10. Image> Resize to 84%. Drag below the frame. Select the frame. Click inside of the frame with the wand tool. Selections> Modify> Expand by 3. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Select the frame layer.
 
Effects> 3D Effects> Drop shadow: vertical 2, horizontal 2, opacity 35, blur 3, color black.
 
Paste tube. Center over frame.
 
Effects> PlugIns> Xero> Porcelain: Softness 50, Strength 128, Brightness 128, Red Channel 0, Green Channel 0, Blue Channel 255.
 
Duplicate.
 
Change the top tube blend mode to Soft Light.
 
Merge down.
 
Drop shadow changing the opacity to 30.
 
Paste EL40. Image> Resize to 85%. Drag behind the tube layer. Position at the bottom right. Duplicate. Image> Mirror.
 
Paste EL38. Drag to the bottom layer. Position to the right.
 
Paste EL36. Position at the top left.
 
Paste EL7. Drag above the frame. Position to the left.
 
Drop shadow same settings.
 
Paste EL11. Image> Resize to 35%. Drag behind the tube. Position at the bottom left.
 
Drop shadow same settings.
 
Merge visible.
 
Image> Canvas Size: 625 width by 640 height.
 
Recenter with pick tool.
 
Add copyright.
 
Add name with font of choice. I used Verdana aize 72 color #f0a9d3.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 15 monochrome checked.
 
Drop shadow changing the opacity to 50.
 
Merge visible.
 
Save as PNG.
 
 
 
 

postheadericon Pink Bubble PTU

 
 
Supplies:
 
PTU kit MsBunny by Designs by Sarah available at Pimp My Tags With Scraps.
 
Tube of choice. I used Anna Marine available at Creative Design Outlet.
 
PlugIns: Xero
 
Font of choice. I used Black Chancery.
 
 
 
 
 
 
Let's Get Started:
 
 
Open a new 700 by 700 image.
 
Paste frame 2. Image> Resize to 90%.
 
Paste pp5. Image> Resize to 90%. Drag under the frame layer. Select the frame. Click inside of the frame with the wand tool. Selections> Modify> Expand by 10. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Paste tube close-up. Position in the right frame.
 
Effects> PlugIns> Xero> Porcelain: Softness 50, Strength 128, Brightness 128, Red Channel 0, Green Channel 0, Blue Channel 255.
 
Duplicate.
 
Change the top tube layer blend mode to Soft Light.
 
Merge down.
 
Duplicate. Image> Mirror.
 
Merge the two tube layers together. Select the paper layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Change the blend mode to Luminance (L).
 
Merge down.
 
Paste the full tube layer. Drag above the frame. Position in the center frame.
 
Porcelain same settings.
 
Duplicate. Drag duplicate under the frame.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 25, blur 5, color black.
 
Select the paper. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the bottom tube layer and hit the delete key on the keyboard. Selections> Select None.
 
Select the top tube layer.
 
Drop shadow same settings.
 
Erase the bottom of the tube that is over the frame.
 
Paste ribbon3. Position at the bottom.
 
Drop shadow changing the opacity to 30.
 
Paste greenery. Drag to the bottom. Position at the bottom.
 
Paste flower2. Image> Resize to 85%. Position to the left. Duplicate. Image> Mirror.
 
Paste flower1. Image> Resize to 65%. Position to the right. Duplicate. Image> Mirror.
 
Drop shadow changing the opacity to 45.
 
Paste spray1. Drag to the bottom layer. Position to the left. Duplicate. Image> Mirror.
 
Merge visible.
 
Image> Canvas Size: 700 width by 575 height.
 
Recenter with the pick tool.
 
Image> Resize to 650 width by 534 height.
 
Add copyright.
 
Add name with font of choice I used Black Chancery size 48 black.
 
Drop shadow same settings.
 
Merge visible.
 
Save as PNG.
Thursday, March 07, 2013

postheadericon Irish Beauty PTU

 
 
Supplies:
 
PTU kit Shake Your Shamrocks by Black Widow Creationz available at Scraps & the City.
 
Tube of choice. I used Gary Rudisill available at Scraps & the City.
 
Mask of Choice. I used Sue's #5 mask available on the Creative Misfit Creations Blog.
 
PlugIs: Xero- Porcelain.
 
Font of choice. I used Dobkin and Celtic Knots.
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste EL34. Image> Resize to 75%.
 
Paste pp8. Image> resize to 75%. Drag behind the frame. Select the frame. Click inside of the frame with the wand tool. Use free hand to select the clovers on the inside of the frame. Selections> modify> Expand by 10. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Paste tube. Image> Resize to 75%. Drag above the frame.
 
Effects> PlugIns> Xero- Porcelain: Softness 50, Strength 128, Brightness 128, Red Channel 0, Green Channel 0, Blue channel 255.
 
Duplicate.
 
Change the blend mode to Luminance(L).
 
Merge down.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 40, blur 5, color black.
 
Duplicate.
 
Drag above the paper layer. Select the paper layer. Selections> Select All. Selections> Float. Selections> Defloat. Select the bottom tube layer and hit the delete key on your keyboard. Selections> Select None.
 
Select the top tube and erase leg area that is over the bottom of the frame.
 
Select the frame. Drop shadow the frame same settings.
 
Create your own saying using font of choice. I used Celtic Knot font size 125 Bold color #038602 to  add "Irish Beauty" to the tag.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 20.
 
Drop shadow changing the opacity to 75 and the blur to 3.
 
Paste EL29. Image> Resize to 50%. Drag behind the wordart. Position at the bottom of the frame.
 
Drop shadow changing the opacity to 30 and the blur to 5.
 
Paste EL42. Image> Resize to 50. Position over the end of the wordart you created.
 
Drop shadow same settings.
 
Paste EL19. Drag above the top tube layer. Position at the bottom.
 
Drop shadow changing opacity to 30.
 
Paste EL14. Image> Resize to 65%. Position to the left.
 
Drop shadow same settings.
 
Merge visible.
 
Recenter in the canvas.
 
Create a new taster layer.
 
Flood Fill the new raster layer with color #038602.
 
Open the mask in psp.
 
Select the tag making sure to be on the flood fill layer. Layers> New Mask Layer> From Image> find the image name in the drop down source window, source luminance selected, Invert mask layer deselected.
 
Merge group.
 
Resize mask layer to 90%.
 
Merge visible.
 
Image> Canvas Size 635 width by 650 height.
 
Recenter.
 
Image> Resize 607 width by 650 height.
 
Add copyright.
 
Add name with font of choice. I used Dobkin size 72 color #45c266.
 
Add noise same as before.
 
Drop shadow changing the opacity to 100 and the blur to 3.
 
Merge visible.
 
Save as PNG.
 
 
 
 
 
 

Tuesday, March 05, 2013

postheadericon A Kiss For Luck Snags

Here are some snags I created with the A Kiss For Luck tutorial. There is absolutely NO altering allowed. This means no removing or adding of any words and no resizing. Thank you for stopping in and saving them.
 
Tutorial and snags created using a kit by Gemini Creationz and artwork by Shawli both of which are available at The PSP Project.
 
 
 
 





postheadericon A Kiss For Luck PTU

 
 
Supplies:
 
PTU Kit A Kiss For Luck by Gemini Creationz available at The PSP Project.
 
Tube of choice. I used a tube by Shawli available at The PSP Project.
 
PlugIns: Xero- Porcelain.
 
Font of choice. I used Van den velde Script demo version.
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste e41. Image> Free Rotate to the right 90 degrees.
 
Paste p6. Image> Resize to 65%. Drag under the frame. Select the frame layer. Click inside of the frame with the wand tool. Selections> Modify> Expand by 10. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None.
 
Paste tube. Position in the frame as desired.
 
Effects> PlugIns> Xero: Porcelain- Softness 50, Strength 128, Brightness 128, Red Channel 0, Green Channel 0, Blue Channel 255.
 
Duplicate.
 
Change the blend mode to Soft Light.
 
Merge down.
 
Duplicate. Drag duplicate above the frame. Select the paper layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the bottom tube layer and hit the delete key on the keyboard. Selections> Select None.
 
Select the top tube.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 30, blur 5, color black.
 
Use the erase tool to remove part at the bottom of the frame on the top tube.
 
Select the frame.
 
Drop shadow changing the opacity to 40.
 
Paste e58. Drag to the bottom layer. Position at the top right. Erase the part to the left.
 
Porcelain with same settings.
 
Drop shadow changing the opacity to 20.
 
Paste e50. Image> Resize to 65%. Drag to the top. Position at the bottom left.
 
Drop shadow changing the opacity to 25.
 
Paste e36. Drag to the bottom. Position at the bottom.
 
Paste e34. Position at the top left.
 
Paste e30. Image> Resize to 85. Drag above the top tube. Position at the bottom right.
 
Drop shadow same settings.
 
Paste e22. Drag to the top. Position at the bottom.
 
Paste e8. Image> Resize to 35%. Position at the bottom left.
 
Drop shadow same settings.
 
Paste e10. Drag behind the pot. Position at the bottom left.
 
Drop shadow same settings.
 
Merge visible.
 
Image> Canvas Size: 565 width by 700 height.
 
Recenter with pick tool.
 
Image> Resize to 525 width by 650 height.
 
Add copyright.
 
Add name with font of choice. I used Van den velde script demo version size 125 Bold color #038602.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 15 monochrome checked.
 
Drop shadow changing the opacity to 100.
 
Merge visible.
 
Save as PNG.
 
 
 
 
 
 

TWI

Photobucket

Sunshine Daze Topsite

Sunshine Daze Topsites List

Vote Please

Photobucket

Fan Of

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Chat box

About Me

My Photo
SuthrnPrincess
I am a mom of 5 rambunctious and audacious kids. 1 girl and 4 boys. I started out tagging and fell in love with my PSP. I am with the most wonderful man in my world, George. If you make something with a mask or template I would love to see it. Please feel free to email me at georges_princess@yahoo.com. If you make a tutorial please link back to my blog for supplies do not include my materials nor link to my file share site. I would love to put your tutorial link on my blog so please feel free to email me :).
View my complete profile

My Blinkies

Photobucket Photobucket Photobucket

CT For

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Followers

Labels