Welcome & Disclaimer

Hello & welcome to SuthrnPrincess Tuts. I am so excited that you stopped in to see what I have made with the gorgeous tubes and fabby kits that are out there. You will find FTU & PTU kits as well as FTU & PTU Tubes are used in my tutorials. If you run into a problem on a tut please feel free to email me and I will help if I can. My use of a FTU tube does not give you permission to use it. I have obtained permission either from the artist themselves or through a group to use their artwork. You need to personally contact them to obtain permission before using.

**Disclaimer**

The tuts contained within this blog are my own creation. They came from my brain and were created by my own hand. Any resemblance to the works of others is completely coincidental.



Powered by Blogger.
Monday, January 14, 2013

postheadericon Princess PTU

 
 
Supplies:
 
PTU Kit Jersey Princess by Black Widow Creationz available at Scraps & the City.
 
Tube of choice. I used Gary Rudisill available at Scraps & the City.
 
PlugIns: Xero-SoftMood, EyeCandy 5- Bevel & Gradient Glow.
 
Font of choice. I used Wedding Script 2.
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste EL10. Image>Resize to 65%.
 
Paste pp6. Image>Resize to 35%. Drag under frame. Select the frame. Click inside with the wand tool. Selctions> Modify> Expand by 15. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Paste tube. Position in the frame.
 
Effects> PlugIns> Xero- SoftMood: Haziness 50, Glow- Red 50, Lock sliders checked, Brightness 0, Contrast 0.
 
Duplicate.
 
Change the blend mode to Screen.
 
Merge down.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 45, blur 5, color black.
 
Select the paper. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on the keyboard. Selections> Select None.
 
Merge down.
 
Select the frame.
 
Drop shadow changing opacity to 30.
 
Paste tube. Position to the left.
 
Drop shadow changing opacity to 25.
 
Paste EL40. Drag above the frame. Position at the top.
 
Drop shadow changing opacity to 30.
 
Paste EL38. Image> Free Rotate: Right 90 degrees. Drag below the frame. Select the paper. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the element layer and hit the delete key on the keyboard. Selections> Select none.
 
Change the blend mode to Soft Light.
 
Merge down.
 
Paste EL36. Image>Resize to 75%. Drag above the bow. Position over the center of the bow.
 
Paste EL22. Image> Resize to 50%. Position at the bottom right.
 
Drop shadow changing opacity to 20.
 
Paste EL16. Drag to the bottom. Position at the top right. Duplicate. Image> Mirror. Image> Flip. Position at the bottom left.
 
Paste EL12. Drag below the cupcake layer. Position behind the cupcake.
 
Drop shadow same settings.
 
Paste EL6. Drag below the brush. Position at the bottom right.
 
Drop shadow same settings.
 
Paste EL7. Drag to the bottom. Position at the bottom.
 
Select the cupcake layer and your text tool.
 
Add wordart of choice. I added Princess with !The Black Bloc size 85 Bold color #b9a7fc. I stretched the word height wise to make it larger.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 50 monochrome checked.
 
Effects> PlugIns> EyeCandy5: Impact- Bevel
 
 
Effects> PlugIns> EyeCandy5:Impact- Gradient Glow
 
Drop shadow changing opacity to 40.
 
Merge visible.
 
Image> Canvas Size: 575 width by 675 height.
 
Recenter with pick tool.
 
Image> Resize to 554 width by 650 height.
 
Add copyright.
 
Add name with font of choice. I used WeddingScript2 size 72 Black.
 
Lower opacity to 75.
 
Merge visible.
 
Save as PNG.
Sunday, January 13, 2013

postheadericon Tearful Love PTU

 
 
Supplies:
 
PTU kit Tearful Love by Alikas Scraps available at Pimp My Tags With Scraps.
 
CBN_MisfitsHeartTemp02 by Deb available on the Creative Misfits Blog (posted 1-29-12).
 
Tube of choice. I used Zindy S.D. Nielsen available in her store.
 
PlugIns: Xero-Porcelain.
 
Font of choice. I used Zebra.
 
 
 
 
 
Let's Get Started:
 
Open the template in psp.
 
Shift + D.
 
Close the original template.
 
Delete the copyright layer.
 
Paste as_paper12. Image>Resize to 85%. Drag above layer 6. Select layer 6. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Delete layer 6.
 
Paste as_paper11. Image>Resize to 85%. Drag above layer 5. Select layer 5. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
Delete layer 5.
 
Paste as_paper10. Image>Resize to 85%. Drag above layer 4. Select layer 4. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
Delete layer 4.
 
Paste as_paper15. Image>Resize to 85%. Drag above layer 3. Select layer 3. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
Delete layer 3.
 
Paste as_paper04. Image>Resize to 85%. Drag above layer 2. Select layer 2. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
Delete layer 2.
 
Paste as_paper03. Image>Resize to 85%. Drag above layer 1. Select layer 1. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
Delete layer 1.
 
Paste tube. Drag above the top circle layer. Position over the circle as desired.
 
Effects> PlugIns> Xero- Porcelain: Softness 50, Strength 128, Brightness 128, Red Channel 0, Green Channel 0, Blue Channel 125.
 
Duplicate tube layer.
 
Change top tube layer blend mode to SoftLight.
 
Merge down.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 25, blur 5, color black.
 
Select the top circle layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on the keyboard. Selections> Select None.
 
Change the tube blend mode to Luminance(L).
 
Merge down.
 
Paste tube. Drag to the top layer. Position over the rect to the right.
 
Porcelain same as first tube.
 
Duplicate and change blend mode to SoftLight.
 
Merge down.
 
Shadow same settings.
 
Select the rect layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on the keyboard. Selections> Select None.
 
Merge tube down.
 
Paste tube. Image> Resize to 65. Position at the bottom left.
 
Drop shadow same settings.
 
Paste as09. Image>Resize to 85%. Drag below the top tube layer. Position to the right of the tube.
 
Drop shadow same settings.
 
Paste as123. Image> Resize to 65%. Drag below as09. Position at the bottom.
 
Drop shadow same settings.
 
Paste as28. Image>Resize to 35%. Drag to the top layer. Position at the top right of the top circle.
 
Drop shadow changing opacity to 30.
 
Duplicate. Position at the right of the rect.
 
Paste as124. Image>Resize to 35%. Drag above the ribbon layer. Position to the right of as09.
 
Paste as64. Image>Resize to 90%. Drag to the bottom.
 
Paste as46. Drag to the bottom. Position top right. Duplicate. Image> Mirror. Image> Flip. Position bottom left.
 
Paste as50. Image> Resize to 50%. Drag above the ribbon layer. Position behind the decoheart.
 
Drop shadow changing opacity to 35.
 
Paste as37. Image> Resize to 50%. Drag above the ribbon layer. Position to the right of the candle.
 
Drop shadow same settings.
 
Paste as35. Image>Resize to 35%. Drag above the ribbon. Position to the right of the clock.
 
Drop shadow same settings.
 
Paste as34. Drag above the bottom circle. Position top right.
 
Paste as70. Drag above the ribbon. Position at the bottom right.
 
Drop shadow changing opacity to 30.
 
Paste as79. Drag to the top layer. Position at the bottom left.
 
Lower layer opacity to 75.
 
Paste as90. Image>Resize to 75%. Drag above the glitter layer. Position at the bottom.
 
Select the top circle.
 
Adjust> Softness> Soften.
 
Drop shadow same settings.
 
Select the middle circle.
 
Adjust> Softness> Soften More.
 
Drop shadow changing the opacity to 35.
 
Select the bottom circle.
 
Adjust> Softness> Soften More.
 
Drop shadow changing opacity to 40.
 
Select the square layer.
 
Adjust> Softness> Soften More.
 
Drop shadow changing opacity to 50.
 
Select the rect layer.
 
Adjust> Softness> Soften.
 
Drop shadow changing opacity to 25.
 
Select the heart circle layer.
 
Adjust> Softness> Soften.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 20 monochrome checked.
 
Drop shadow changing opacity to 50.
 
Merge visible.
 
Image> Canvas Size: 690 width by 665 height.
 
Recenter with pick tool.
 
Image>Resize to 650 width by 626 height.
 
Add copyright.
 
Add name with font of choice. I used Zabra size 65 color #c9a376.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 60 monochrome checked.
 
Drop shadow changing opacity to 100.
 
Merge visible.
 
Save as PNG.
Saturday, January 12, 2013

postheadericon All Of My Heart PTU

 
 
Supplies:
 
PTU Kit All of my love by Chaos Priestess available at Whisprd Designz.
 
Tube of choice. I used Barbara Jensen available at Scraps & the City.
 
PlugIns: Xero-Porcelain, & EyeCandy5- Gradient Glow.
 
Font of choice. I used !The Black Bloc.
 
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste Frame_04.
 
Paste Paper_15. Image>Resize to 85%. Drag behind the frame. Select the frame. Click inside of the frame with the wand tool. Selections> modify> Expand by 15. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Paste tube close-up. Position in the frame as desired. Select the paper. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on the keyboard. Selections> Select None.
 
Effects> PlugIns> Xero- Porcelain: Softness 50, Strength 128, Brightness 128, Red Channel 0, Green Channel 0, Blue Channel 255.
 
Duplicate.
 
Change the blend mode of the tube to SoftLight.
 
Merge down.
 
Change the blend mode to Luminance(L).
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 40, blur 5, color black.
 
Select the frame layer.
 
Drop shadow changing the opacity to 35.
 
Paste Bow_04. Image>Resize to 65%. Position at the top right.
 
Drop shadow changing the opacity to 25.
 
Paste Foliage_02. Drag to the bottom layer.
 
Paste Blinghearttrail. Image> Resize to 80%.
 
Paste GlitterSplatter_05. Drag to the bottom. Position as desired.
 
Paste RosePetals_02. Image>Resize to 80%. Drag to the top. Position at the bottom.
 
Drop shadow changing opacity to 15.
 
Merge visible.
 
Image> Canvas Size: 500 width by 675 height.
 
Recenter with pick tool.
 
Image>Resize to 481 width by 650 height.
 
Add copyright.
 
Add name with font of choice. I used !The Black Bloc size 36 Bold color #98181e.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 50 monochrome checked.
 
PlugIns> EyeCandy5: Impact> Gradient Glow-
 
Drop shadow changing opacity to 25.
 
Merge visible.
 
Save as PNG.
Friday, January 11, 2013

postheadericon Winter Wonderland PTU

 
 
Supplies:
 
PTU Kit Winter Wonderland by pimp'd Designz available at Pimp My Tags With Scraps.
 
Tube of choice. I used Ismael Rac available at his store.
 
PlugIns: Xero-Porcelain.
 
Font of choice. I used Callie Hand.
 
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste frame-01. Image>Resize to 95%. Image> Free Rotate to the left 90 degrees.
 
Paste pp-03. Image>Resize to 75%. Drag below the frame. Select the frame. Click inside with the wand. Selections> Modify> Expand by 10. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Paste tube of choice. Position in the frame.
 
Effects> PlugIns> Xero-Porcelain: Softness 50, Strength 128, Brightness 128, Red Channel 0, Green Channel 0, Blue Channel 135.
 
Duplicate.
 
Change the blend mode to Luminance(L).
 
Merge down.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 25, blur 5, color black.
 
Duplicate tube again. Drag above the frame. Erase the right arm and the legs where they are over the frame.
 
Select the bottom tube and erase the right arm and legs where they are visible outside of the frame.
 
Select the frame.
 
Drop shadow changing opacity to 35.
 
Paste tree. Drag to the bottom. Position to the left.
 
Drop shadow changing the opacity to 15.
 
Paste snow. Drag to the bottom.
 
Paste ribbon-04. Image>Resize to 65%. Drag above the frame. Position at the top.
 
Drop shadow changing opacity to 25.
 
Paste pinecone-01. Image>Resize to 50%. Drag above the tree. Position at the bottom left.
 
Drop shadow same settings.
 
Paste snowflake-01. Image>Resize to 50%. Drag to the top layer. Position at the bottom right.
 
Drop shadow same settings.
 
Merge visible.
 
Image> Canvas Size: 565 width by 700 height.
 
Recenter with pick tool.
 
Image>Resize to 525 width by 650 height.
 
Add copyright.
 
Add name with font of choice. I used Callie Hand size 46 Bold color # 1e3c0c.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 30 monochrome checked.
 
Drop shadow changing opacity 40.
 
Merge visible.
 
Save as PNG.

postheadericon Winter Day PTU

 
 
Supplies:
 
PTU Kit Winter Meadows by Pimp'd Designz available at Pimp My Tags With Scraps.
 
Tube of choice. I used Zindy S. D. Nielsen available in her store.
 
PlugIns: Xero-Porcelain.
 
Font of choice. I used Volutes.
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste frame-03. Image>Resize to 90%.
 
Paste pp-01. Image>Resize to 65%. Drag below the frame. Select the frame. Click inside with the wand tool. Selections> Modify> Expand by 10. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select none.
 
Paste tube. Position to the right in the frame.
 
Effects> PlugIns> Xero-Porcelain: Softness 50, Strength 128, Brightness 128. Red Channel 0, Green Channel 0, Blue Channel 135.
 
Duplicate.
 
Change the blend mode to Soft Light.
 
Merge down.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 30, blur 5, color black.
 
Select paper layer. Selection> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on the keyboard. Selections> Select None.
 
Change the blend mode to Luminance(L).
 
Merge down.
 
Select the frame.
 
Drop shadow same settings.
 
Paste snowman. Drag to the top. Image>Resize to 50%. Position to the bottom left.
 
Drop shadow same settings.
 
Paste ribbon-04. Image>Resize to 50%. Position top center.
 
Drop shadow same settings.
 
Paste flower-02. Image>Resize to 50%. Drag behind the snowman and position to the bottom left.
 
Paste tree. Image>Resize to 50%. Drag below the flower. Position behind the snowman.
 
Drop shadow same settings.
 
Paste snowflake-01. Drag to the bottom layer. Position top left. Duplicate. Image> Mirror. Duplicate. Image> Flip. Duplicate. Image> Mirror.
 
Merge visible.
 
Image> Canvas Size to 580 width by 610 height.
 
Recenter with pick tool.
 
Add copyright.
 
Add name. I used Volutes size 48 Bold color #86172b.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 20 monochrome checked.
 
Drop shadow same settings.
 
Merge visible.
 
Save as PNG.

postheadericon Summer PTU

 
Supplies:
 
PTU kit AB Series 06 by Pimp'd Designz available at Pimp My Tags With Scraps.
 
Tube of choice. I used Danny Drake available at Creative Design Outlet.
 
Font of choice. I used Alighty Nesia.
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste frame-01.
 
Paste pp-04. Image> resize to 75%. Select the frame. Click inside of the frame with the wand tool. Selections> Modify> Expand by 10. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Paste tube close-up. Position in the frame.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 25, blur 5, color black.
 
Duplicate tube. Drag above the frame. Erase the bottom of the top layer.
 
Select the frame.
 
Drop shadow same settings.
 
Paste sand. Drag to the bottom. Position off center to the bottom right.
 
Paste net. Drag above the paper layer. Position in the frame as desired. Select the paper. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the net layer and hit the delete key on the keyboard. Selections> Select None.
 
Change the blend mode to Luminance.
 
Drop shadow changing the opacity to 24.
 
Merge down.
 
Paste umbrella. Image> Resize to 65%. Drag behind the paper.
 
Image> Free Rotate> to the left 20 degrees.
 
Position to the top left.
 
Drop shadow same settings.
 
Paste water. Drag to the top layer. Position at the bottom.
 
Paste shell-04. Image>Resize to 25%. Position at the bottom right.
 
Drop shadow same settings.
 
Paste shell-03. Image>Resize to 40%. Drag behind shell 04 layer. Position behind shell 04.
 
Drop shadow same settings.
 
Paste ribbon-02. Image>Resize to 85%. Drag below shell 03. Position behind shell 03.
 
Drop shadow same settings.
 
Merge visible.
 
Image> Canvas Size: 645 width by 658 height.
 
Recenter with pick tool.
 
Image> Resize to 637 width by 650 height.
 
Add copyright.
 
Add name with font of choice. I used Alighty Nesia size 72 Bold color #90cecd.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 30.
 
Drop shadow changing opacity to 55.
 
Merge visible.
 
Save as PNG.

postheadericon Sexy Cook PTU

 
Supplies:
 
PTU Kit AB Series 05 by Pimp'd Designz available at Pimp My Tags With Scraps.
 
Tube of choice I used Arthur Crowe available at his store.
 
Font of choice. I used Bedtime Stories.
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste frame-02. Image>Resize to 85%.
 
Paste pp-01. Image> Resize to 75%. Drag below the frame. Select the frame. Click inside of the frame with the wand tool. Selections> Modify> Expand by 10. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Paste pp-02. Image> Resize to 75%. Select paper 1. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper 2 layer and hit the delete key on the keyboard. Selections> Select None.
 
Change the blend mode to Luminance.
 
Merge down.
 
Paste tube. Image> Resize to 75%. Position in the frame as desired.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 25, blur 5, color black.
 
Duplicate. Drag duplicate above frame.
 
Erase the part of the top tube that is over the bottom of the frame and below the frame.
 
Select the bottom tube and erase the bottom part of the tube that is viewable under the frame.
 
Select the frame.
 
Drop shadow same settings.
 
Paste cupcake-wrapper. Drag to the bottom layer. Position top left. Duplicate. Image> Mirror. Image> Flip.
 
Lower opacity of both to 50.
 
Paste ribbon-01. Image> Resize to 30%. Drag to the top layer. Position at the bottom.
 
Drop shadow changing opacity to 30.
 
Paste wooden-spoon. Drag below the paper. Position to the right.
 
Drop shadow same settings.
 
Paste ribbon-03. Drag below spoon layer. Position at the bottom.
 
Paste flower-01. Image>Resize to 35%. Drag below the ribbon-03 layer. Position behind the ribbon.
 
Drop shadow changing opacity to 40.
 
Merge visible.
 
Image> Canvas Size: 605 width by 700 height.
 
Recenter with pick tool.
 
Image> Resize to 562 width by 650 height.
 
Add copyright.
 
Add name with font of choice. I used bedtime stories size 72 color #d13372.
 
Drop shadow changing opacity to 50 and blur to 3.
 
Merge visible.
Wednesday, January 09, 2013

postheadericon Christmas PTU

 
 
Supplies:
 
PTU kit AB Series 04 by Pimp'd Designz available at Pimp My Tags With Scraps.
 
Tube of choice. I used Arthur Crowe available in his store.
 
Font of choice. I used Wedding Script.
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste frame-01. Image>Resize to 90%.
 
Paste pp-06. Image>Resize to 75%. Drag below the frame.
 
Select the frame. Click inside of the frame with the wand tool. Selections> Modify> Expand by 10. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Paste tube. Image>Resize to 75%. Position in the frame.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 25, blur 5, color black.
 
Duplicate. Drag above the frame layer.
 
Erase the bottom of the tube that is over the frame.
 
Erase the bottom of the tube that is visible under the frame on the bottom tube layer.
 
Select the frame.
 
Drop shadow same settings.
 
Paste ribbon-03. Image>Resize to 85%. Drag to the bottom layer. Position at the bottom of the frame.
 
Drop shadow changing opacity to 35.
 
Paste ribbon-02. Drag behind the top tube layer. Position at the top left.
 
Drop shadow changing opacity to 20.
 
Paste snowflake. Image>Resize to 85%. Drag to the top layer. Position at the bottom right.
 
Drop shadow same settings.
 
Paste candy-cane. Image>Resize to 60%. Position over the snowflake.
 
Drop shadow same settings.
 
Paste flower-01. Image>Resize to 25%. Drag above the frame layer. Position at the bottom left. Duplicate. Image> Mirror.
 
Drop shadow both changing opacity to 30.
 
Paste holly-01. Drag to the bottom layer. Position to the right.
 
Erase the bottom.
 
Drop shadow changing opacity to 40.
 
Paste holly-02. Image>Resize to 65%. Position to the left. Duplicate. Image> Mirror.
 
Drop shadow same settings.
 
Paste ornament. Image>Resize to 85%. Drag to the top layer. Position at the bottom and to the right some.
 
Drop shadow changing opacity to 20.
 
Paste glitter. Drag to the bottom. Position towards the top. Duplicate. Image> Flip. Duplicate. Image> Mirror. Duplicate. Image> Flip.
 
Merge visible.
 
Image> Resize to 650 by 650.
 
Add copyright.
 
Add name. I used Wedding Script size 42 color white.
 
Change the blend mode to Soft Light.
 
Drop shadow and change the opacity to 100.
 
Merge visible.
 
Save as PNG.

postheadericon Dreamer PTU

 
 
Supplies:
 
PTU Kit AB Series 03 by Pimp'd Designz available at Pimp My Tags With Scraps.
 
Mask of choice. I used Grunge 2 by Sue on the Creative Misfits Blog (posted 5-19-12).
 
Tube of choice. I used Zindy S.D. Nielsen avialable in her store.
 
Font of choice. I used Agatha.
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste frame-01.
 
Paste pp-01. Image>Resize to 75%. Drag below the frame.
 
Select the frame. Click inside of the frame with the wand tool. Selections> Modify> Expand by 10. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Paste tube of choice.
 
Change the blend mode to Luminance.
 
Paste ribbon-04. Image>Resize to 75%. Drag to the top layer. Position to the top left.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 20, blur 5, color black.
 
Paste sparkle. Drag below the frame.
 
Change the blend mode to Soft Light.
 
Paste ribbon-01. Image>Resize to 50%. Drag to the bottom layer. Position at the top right.
 
Drop shadow changing opacity to 40.
 
Paste leaf. Image>Resize to 50%. Drag above the frame. Position at the bottom right.
 
Drop shadow changing opacity to 25.
 
Paste button-01. Image>Resize to 50%. Position at the bottom of the leaf.
 
Drop shadow same settings.
 
Paste butterfly. Image>Resize to 25%. Position over the leaf.
 
Drop shadow same settings.
 
Create wording of choice with font of choice. I used Weddings Script size 70 color white.
 
Type the word repeatedly so that it fits the entire width of the frame.
 
Drag behind the frame
 
Change the blend mode to Soft Light.
 
Position at the bottom of the frame.
 
Drop shadow changing opacity to 90.
 
Paste pp-01. Drag to the bottom.
 
Open the mask in psp.
 
Select the tag you are working on again.
 
Layers> New Mask Layer> From Image: Select Grunge 2 in Source Window, Select Source Luminance, Deselect Invert Mask Data.
 
Stretch the mask to fit as desired behind the frame.
 
Merge group.
 
Select the frame.
 
Drop shadow opacity 40.
 
Merge visible.
 
Image>Resize to 650 width by 650 height.
 
Add copyright.
 
Add name with font of choice. I used Agatha size 48 Bold color white.
 
Drop shadow same settings.
 
Merge visible.
 
Save as PNG.

postheadericon Beauty PTU

 
Supplies:
 
PTU AB Series 02 by Pimp'd Designz available at Pimp My Tags With Scraps.
 
Tube of choice. I used Zindy S. D. Nielsen available in her shop.
 
PlugIn- Xero: Porcelain.
 
Font of choice. I used Black Swan BF.
 
 
 
 
 
 
Let's Get Started:
 
Open a new 700 by 700 image.
 
Paste frame-02.
 
Paste pp-05. Image>Resize to 65%. Drag under the frame layer. Select the frame layer. Click inside with wand tool. Selections> Modify> Expand by 10. Selections> Invert. Select the paper layer and hit the delete key on the keyboard. Selections> Select None.
 
Paste tube. Position in the frame as desired. Select the paper. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on the keyboard. Selections> Select None.
 
Effects> PlugIns> Xero> Porcelain: Softness 50, Strength 128, Brightness 128, Red Channel 0, Green Channel 0, Blue Channel 255.
 
Duplicate.
 
Change the blend mode of the top tube to Soft Light.
 
Merge down.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 45, blur 2, color black.
 
Select the frame.
 
Drop shadow opacity 30.
 
Paste petals. Position at the bottom of the frame.
 
Drop shadow opacity 25.
 
Paste moon. Image>Resize to 65%. Drag to the bottom layer. Position to the left.
 
Paste butterfly. Image>Resize to 40%. Drag to the top layer. Position at the bottom left.
 
Drop shadow.
 
Paste feather.Image>Resize to 50%. Drag to the bottom layer. Position at the bottom right.
 
Duplicate.
 
Image> Mirror.
 
Drop shadow both same settings.
 
Merge visible.
 
Image> Canvas Size: 440 width by 633 height.
 
Recenter with pick tool.
 
Add copyright.
 
Add name with font of choice. I used Black Swan BF size 48 Bold color white.
 
Drop shadow changing opacity to 100 and blur to 5.
 
Merge visible.
 
Save as PNG.

TWI

Photobucket

Sunshine Daze Topsite

Sunshine Daze Topsites List

Vote Please

Photobucket

Fan Of

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Chat box

About Me

My Photo
SuthrnPrincess
I am a mom of 5 rambunctious and audacious kids. 1 girl and 4 boys. I started out tagging and fell in love with my PSP. I am with the most wonderful man in my world, George. If you make something with a mask or template I would love to see it. Please feel free to email me at georges_princess@yahoo.com. If you make a tutorial please link back to my blog for supplies do not include my materials nor link to my file share site. I would love to put your tutorial link on my blog so please feel free to email me :).
View my complete profile

My Blinkies

Photobucket Photobucket Photobucket

CT For

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Followers

Labels