Welcome & Disclaimer

Hello & welcome to SuthrnPrincess Tuts. I am so excited that you stopped in to see what I have made with the gorgeous tubes and fabby kits that are out there. You will find FTU & PTU kits as well as FTU & PTU Tubes are used in my tutorials. If you run into a problem on a tut please feel free to email me and I will help if I can. My use of a FTU tube does not give you permission to use it. I have obtained permission either from the artist themselves or through a group to use their artwork. You need to personally contact them to obtain permission before using.

**Disclaimer**

The tuts contained within this blog are my own creation. They came from my brain and were created by my own hand. Any resemblance to the works of others is completely coincidental.



Powered by Blogger.
Monday, September 10, 2012

postheadericon Blood Lust PTU

 
 
Supplies:
 
PTU kit Blood Lust by Amy Marie available at Scraps & the City.
 
Template 111 by Pooker available on her blog Elegant Inspirations.
 
Tube of choice. I used Celinart available at Scraps & the City.
 
Font of choice. I used Wicked Scray Movie.
 
 
 
 
 
Let's Get Started:
 
Open template in psp.
 
Shift + D.
 
Close the original template.
 
Delete Cr Info and Raster 1.
 
Merge Black Dotted Frame 2 & 3 together.
 
Merge Black Circle 1 & 2 together.
 
Merge Grey Circle 1 & 2 together.
 
Image> Resize to 700 width by 700 height.
 
Paste pp12. Image>Resize to 85%. Drag above the black boxes layer. Select the black boxes layer. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key. Selections> Select None.
 
Delete the black boxes layer.
 
Paste pp018. Image> Resize to 85%. Drag above the black dotted frame 3 layer. Select the black dotted frame 3 layer. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key. Selections> Select None.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 100 monochrome checked.

Delete the black dotted frame 3 layer.
 
Paste pp016. Image> Resize to 85%. Drag above the orange dotted frames layer. Select the orange dotted frames layer. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key. Selections> Select None.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 50 monochrome checked.

Delete the orange dotted frames layer.
 
Paste pp11. Image> Resize to 85%. Drag above the orange rectangle layer. Select the orange rectangle layer. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key. Selections> Select None.

Delete the orange rectangle layer.
 
Paste pp8. Image> Resize to 65%. Drag above the orange circle layer. Select the orange circle layer. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key. Selections> Select None.

Delete the orange circle layer.
 
Paste pp4. Image> Resize to 65%. Drag above the mini circles layer. Select the mini circles layer. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key. Selections> Select None.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 100 monochrome checked.

Delete the black dotted frame 3 layer.
 
Paste pp014. Image> Resize to 75%. Duplicate. Drag above the black dotted frame 1 layer. Select the black dotted frame 1 layer. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key. Selections> Select None.

Adjust> Add/Remove Noise> Add Noise: Gaussian 100 monochrome checked.

Delete the black dotted frame 1 layer.
 
Drag the duplicate above the white circle layer. Select the white circle layer. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key. Selections> Select None.
 
Delete the white circle layer.
 
Paste pp015. Image> Resize to 75%. Drag above the white dotted rectangle layer. Duplicate. Select the white dotted rectangle layer. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key. Selections> Select None.

Adjust> Add/Remove Noise> Add Noise: Gaussian 100 monochrome checked.

Delete the white dotted rectangle layer.
 
Drag duplicate above mini dotted square layer. Select the mini dotted square layer. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key. Selections> Select None.

Adjust> Add/Remove Noise> Add Noise: Gaussian 100 monochrome checked.

Delete the mini dotted square layer.
 
 Paste pp3. Image> Resize to 75%. Drag above the Grey Circle 2 layer. Select the Grey Circle 2 layer. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key. Selections> Select None.
 
Delete the Grey Circle 2 layer.
 
Paste pp17. Image> Resize to 75%. Select the Black Circle 2 layer. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key. Selections> Select None.
Delete the Black Circle 2 layer.
 
Select the arrows layer and add noise same settings.
 
Delete the mini orange circles layer and the black lines layer.
 
Paste tube. Duplicate and hide 1 layer. Drag above the top circle layer. Position in the center of the circle. Select the circle. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the visible tube layer and hit the delete key. Selections> Select None.
 
Change the blend mode to Luminance (L).
 
Merge down.
 
Unhide tube layer. Drag above 3 squares layer. Duplicate. Hide 1. Position the visible tube over the left square. Position in square as desired. Select the 3 squares layer. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key. Selections> Select None.
 
Erase any portion of the tube visible in the other two squares.
 
Change the blend mode to Luminance (L).
 
Merge down.
 
Duplicate the hidden tube and unhide 1 layer. Image> Mirror. Select the 3 squares layer. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key. Selections> Select None.
 
Erase any portion of the tube visible in the other two squares.
Change the blend mode to Luminance (L).
 
Merge down.
 
Duplicate the hidden tube again and unhide 1 layer. Position in the middle square. Select the 3 squares layer. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key. Selections> Select None.
Erase any portion of the tube visible in the other two squares.
Change the blend mode to Luminance (L).
 
Merge down.
 
Unhide the last tube layer. Image> Resize to 55%. Drag under the 3 square layer. Position to the right.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 50, blur 5, color black.
 
Drop shadow all glitter layers.
 
Drop shadow 3 squares layer.
 
Select the rectangle. Adjust> Softness> Soften.
 
Drop shadow layer same settings.
 
Drop shadow circle/tube merged layer.
 
Select the biggest circle layer. Adjust> Softness> Soften More.
 
Drop shadow same settings.
 
Select the top double circle layer.
 
Drop shadow same settings.
 
Select the bottom double circle layer.
 
Adjust> Softness> Soften More x2.
 
Drop shadow same settings.
 
Paste skull2. Image>Resize to 65%. Drag above the dotted glitter circle layer. Position at the bottom left.
 
Drop shadow same settings.
 
Paste 2. Drag to behind the skulls layer. Position behind the skulls. Duplicate and drag to the top layer. Erase stick over square and skulls.
 
Drop shadow bottom 2 layer.
 
Paste 1. Drag above the circle tube layer. Position at the bottom of the circle. Select the circle. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the 1 layer and hit the delete key. Selections> Select None.
 
Lower layer opacity to 75.
 
Merge down.
 
Paste tombstone. Image>Resize to 75%. Drag above layer 2. Position to the left of the stick.
 
Drop shadow same settings.
 
Paste trees. Image>Resize to 75%. Drag behind the circle tube layer. Position over the bottom circle. Select the bottom circle. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the trees layer and hit the delete key. Selections> Select None.
 
Merge down.
 
Paste 46. Image> Resize to 15%. Drag above 3 square layer. Position at the bottom right of the left square. Duplicate. Image> Mirror. Image> Flip.
 
Merge the two 46 layers together.
 
Lower opacity to 60%.
 
Merge down.
 
Paste books. Image>Resize to 30%. Drag behind the tombstone layer. Position to the right of the skulls.
 
Drop shadow same settings.
 
Paste book2. Image>Resize to 25%. Drag behind books. Position to the right of the books.
 
Drop shadow same settings.
 
Paste spider1. Image>Resize to 25%. Drag to the top layer. Position over the top left corner of the rectangle. Duplicate. Image>Mirror. Position bottom right of rectangle.
 
Drop shadow both spider layers same settings.
 
Paste web. Image>Resize to 90%. Drag above the rectangle layer. Position towards the bottom.
 
Paste hearneyes. Image>Resize to 65%. Position bottom left.
 
Drop shadow same settings.
 
Paste ground. Image>Resize to 85%. Drag to the bottom layer. Position at the bottom.
 
Paste candle 2. Image>Resize to 45%. Drag above the tombstone layer. Position to the right of the tombstone.
 
Drop shadow same settings.
 
Paste b5. Drag above 3 square layer. Position over the 3 square layer. Select the 3 square layer. Selections> All. Selections> Float. Selections> Defloat. Selections> Invert. Select the b5 layer and hit the delete key. Selections> Select None.
 
Lower opacity to 20.
 
Merge down.
 
Paste r2. Drag to the bottom. Posituion at the top right.
 
Drop shadow same settings.
 
Merge visible.
 
Add copyright.
 
Add name with font of choice. I used Wicked Scary Movie size 72 bold color #891f1.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 50 monochrome checked.
 
Drop shadow: vertical 3, horizontal 3, opacity 100, blur 5, color black.
 
Merge visible.
 
Save as PNG.
 

0 comments:

TWI

Photobucket

Sunshine Daze Topsite

Sunshine Daze Topsites List

Vote Please

Photobucket

Follow by Email

Fan Of

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Chat box

About Me

My Photo
SuthrnPrincess
I am a mom of 5 rambunctious and audacious kids. 1 girl and 4 boys. I started out tagging and fell in love with my PSP. I am with the most wonderful man in my world, George. If you make something with a mask or template I would love to see it. Please feel free to email me at georges_princess@yahoo.com. If you make a tutorial please link back to my blog for supplies do not include my materials nor link to my file share site. I would love to put your tutorial link on my blog so please feel free to email me :).
View my complete profile

My Blinkies

Photobucket Photobucket Photobucket

CT For

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Followers

Labels