Welcome & Disclaimer

Hello & welcome to SuthrnPrincess Tuts. I am so excited that you stopped in to see what I have made with the gorgeous tubes and fabby kits that are out there. You will find FTU & PTU kits as well as FTU & PTU Tubes are used in my tutorials. If you run into a problem on a tut please feel free to email me and I will help if I can. My use of a FTU tube does not give you permission to use it. I have obtained permission either from the artist themselves or through a group to use their artwork. You need to personally contact them to obtain permission before using.

**Disclaimer**

The tuts contained within this blog are my own creation. They came from my brain and were created by my own hand. Any resemblance to the works of others is completely coincidental.



Powered by Blogger.
Wednesday, November 14, 2012

postheadericon Attitude Is Everything PTU

 
Supplies:
 
PTU kit Macabra by Skulliez Skrapz available at Pimp My Tags WIth Scraps.
 
Temp104 by Scrap Rebellion available here.
 
Tube of choice. I used Barbara Jensen available at her store.
 
Font of choice: I used Vladimir Script, Wide Latin & Ville de Geneve ES.
 
PlugIns: EyeCandy5-Impact- Bevel.
 
 
 
 
 
 
Let's Get Started:
 
Open the template in psp.
 
Shift + D.
 
Close the original.
 
Delete the copyright layer.
 
Paste pp9. Image>Resize to 85%. Duplicate. Hide 1 layer. Select the top dotted lines layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None.
 
Delete top dotted lines layer.
 
Drag duplicate above the second dotted lines layer. Duplicate again and unhide one of the layers. Select the second dotted lins layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None.
Delete second dotted lines layer.
 
Drag the second duplicate of the paper above the bottom dotted lines layer. Select the bottom dotted lines layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None.
Delete bottom dotted lines layer.
 
Merge blk btm square and blk top square.
 
Paste pp14. Image> Resize to 85%. Select the blk top square layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None.
 
Delete the blk top square layer.
 
Paste pp15. Image> Resize to 85%. Drag above the circle layer. Select the circle layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None.
Delete the circle layer.
 
Paste pp17. Image> Resize to 85%. Drag above the rectangle layer. Select the rectangle layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None.
Delete the rectangle layer.
 
Paste pp18. Image> Resize to 85%. Drag above the btm square layer. Select the btm square layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None.
Delete the btm square layer.
 
Paste pp16. Image> Resize to 85%. Drag above the top square layer. Select the top square layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the paper layer and hit the delete key on your keyboard. Selections> Select None.
Delete the top square layer.
 
Paste tube of choice close-up.
 
Effects> 3D Effects> Drop Shadow: vertical 2, horizontal 2, opacity 50, blur 5, color black.
 
Drag the tube close up above the circle layer. Position in the circle. Select the circle layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on your keyboard. Selections> Select None.
 
Change the layer blend mode to Luminance.
 
Merge down.
 
Adjust> Softness> Soften.
 
Drop shadow same settings.
 
Paste close-up again. Drag above the bottom square layer. Duplicate. Image> Mirror. Hide the duplicate. Position the original as desired over the bottom square. Drop shadow same settings. Select the bottom square layer. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on your keyboard. Selections> Select None.
 
Change the blend mode to Luminance(L).
 
Adjust> Softness> Soften.
 
Merge down.
 
Drop shadow same settings.
 
Unhide the duplicate mirrored tube. Position over the top square. Drop shadow same settings. Select the top square. Selections> Select All. Selections> Float. Selections> Defloat. Selections> Invert. Select the tube layer and hit the delete key on your keyboard. Selections> Select None.
 
Change the blend mode to Luminance.
 
Adjust> Softness> Soften.
 
Merge down.
 
Drop shadow same settings.
 
Select the rectangle.
 
Adjust> Softness> Soften More.
 
Select each of the two square layers and Soften More as well.
 
Drop shadow same settings.
 
Select dotted lines.
 
Drop shadow changing the opacity to 60.
 
Paste tube. Image>Resize to 85%. Drag behind the rectangle and position to the left.
 
Drop shadow changing opacity to 45.
 
Paste butterflies. Drag to the top layer. Position at the top right.
 
Drop shadow:vertical 3, horizontal 3, opacity 30, blur 5, color black.
 
Paste butterfly2. Position to the left.
 
Drop shadow same settings.
 
Paste bow. Position at the top.
 
Drop shadow: vertical 2, horizontal 2, opacity 50, blur 5, color black.
 
Paste button. Image>Resize to 50%. Position at the top left of the rectangle. Duplicate. Image> Mirror.
 
Drop shadow both same settings.
 
Paste flower8. Image> Resize to 75%. Drag below the bottom button. Position behind the left button. Duplicate. Image> Mirror.
 
Drop shadow both changing opacity to 40.
 
Paste smooch2. Image>Resize to 85%. Position at the bottom of the circle.
 
Drop shadow changing the opacity to 50.
 
Select the rectangle. Click with the text tool. Type in saying of choice. I typed "Attitude" with Wide Latin font size 72 Bold color #940f15.
 
Stretch the word with the pick tool to fit the rectangle.
 
Adjust> Add/Remove Noise> Add Noise: Gaussian 100 monochrome checked.
 
Effects> PlugIns> AlienSkin EyeCandy: Impact - Bevel: Bevel width 14.15, Bevel Height 68, Smoothness 39.08, Round Corners 0, Bevel Placement Inside, Darken Deep Areas 21, Shade Interior Selected, Surface None, Direction 135, Inclination 45, Highlight Brightness 44, Highlight Size 77, Highlight Color white, Shadow color #800000, Factory Profile Button.
 
Drop shadow: vertical 3, horizontal 3, opacity 100, blur 7, color black.
 
Add "is everything" with font of choice. I used Ville de Geneve ES size 72, Bold, color Black. Place under attitude.
 
Drop shadow: vertical 2, horizontal 2, opacity 75, blur 5, color black.
 
Merge visible.
 
Image> Resize to 650 by 650.
 
Add copyright.
 
Add name using font of choice. I used Vladimir Script size 72 color #800000.
 
Drop shadow changing opacity to 75 and blur to 7.
 
Merge visible.
 
Save as PNG.

0 comments:

TWI

Photobucket

Sunshine Daze Topsite

Sunshine Daze Topsites List

Vote Please

Photobucket

Follow by Email

Fan Of

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Chat box

About Me

My Photo
SuthrnPrincess
I am a mom of 5 rambunctious and audacious kids. 1 girl and 4 boys. I started out tagging and fell in love with my PSP. I am with the most wonderful man in my world, George. If you make something with a mask or template I would love to see it. Please feel free to email me at georges_princess@yahoo.com. If you make a tutorial please link back to my blog for supplies do not include my materials nor link to my file share site. I would love to put your tutorial link on my blog so please feel free to email me :).
View my complete profile

My Blinkies

Photobucket Photobucket Photobucket

CT For

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Followers

Labels